Washing Machine Inlet Hose Filter
- Family: Bathroom & Personal Care Mesh
- Standard: IEC 60456 / IEC 61770
Filter Fabrication & Assembly
Cutting, rimming, spot-welding, framing and assembling mesh into finished filter parts. 86 products in the catalog are made with this process.
How it is made
Media is cut by die, laser or waterjet, then rimmed, spot-welded into packs, rolled and seam-welded into tubes, mounted in frames or welded to end caps and fittings, and finally cleaned and inspected.
What the process can do
Discs, packs, cartridges, strainers, framed screens and sieves from a few millimeters to over 1.5 m.
Best for
Turning any mesh into a part that drops into your machine.
Limits
Each joint must seal — edge bypass is the most common failure.
Design & ordering tips
Send the drawing with sealing faces, edge treatment and cleanliness requirements.
Products made by filter fabrication & assembly
Smoke & Gas Detector Insect Screen
- Family: Acoustic & Electronics Mesh
- Standard: UL 217 / EN 14604
Earbud & Headphone Nozzle Mesh
- Family: Acoustic & Electronics Mesh
- Standard: IEC 60268-7
Gas Sensor Sintered Flame-Arrestor Cap
- Family: Acoustic & Electronics Mesh
- Standard: IEC 60079-1 (Ex d) designs
Smartwatch & Wearable Vent Mesh
- Family: Acoustic & Electronics Mesh
- Standard: IEC 60529 IP68 / ISO 22810
Battery Pack Pressure Vent Mesh
- Family: Acoustic & Electronics Mesh
- Standard: UL 2580 / IEC 62133 designs
Fuel Pump Strainer & Sock Filter
- Family: Automotive Mesh & Filters
- Standard: SAE J905 / ISO 19438
Performance Air Intake Filter Wire Cage
- Family: Automotive Mesh & Filters
- Standard: SAE J726 / ISO 5011 assemblies
DEF / AdBlue Tank & Pump Filter
- Family: Automotive Mesh & Filters
- Standard: ISO 22241
Axle & Transmission Breather Vent Filter
- Family: Automotive Mesh & Filters
- Standard: SAE J1858 assemblies
Fine Mesh Kitchen Sieve & Strainer
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Windshield Washer Pump Strainer
- Family: Automotive Mesh & Filters
- Standard: Automotive OEM
Oil Splatter Screen
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Bar Fine-Mesh Cocktail Strainer
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Flour Sifter & Baking Sieve
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Honey & Beekeeping Double Strainer
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Homebrew Hop Spider & Mash Filter
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Air Fryer Basket Mesh Insert
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Water Pitcher & Dispenser Filter Screen
- Family: Kitchen & Appliance Filters
- Standard: NSF/ANSI 42 / 53 assemblies
Refrigerator & Ice Maker Inlet Valve Screen
- Family: Kitchen & Appliance Filters
- Standard: NSF/ANSI 61 / UL 250
Toilet Fill Valve Inlet Filter Screen
- Family: Bathroom & Personal Care Mesh
- Standard: ASSE 1002 / EN 14124
Smartphone Speaker & Receiver Dust Mesh
- Family: Acoustic & Electronics Mesh
- Standard: IEC 60529 IP67 / IP68 designs
MEMS Microphone Dust Mesh
- Family: Acoustic & Electronics Mesh
- Standard: IEC 60529 IP67 / IP68 designs
Espresso Puck Screen
- Family: Kitchen & Appliance Filters
- Standard: FDA 21 CFR / EU 1935/2004 food contact
Other manufacturing processes
Woven Wire Mesh (Weaving)
96 products
Wire Crimping & Heavy Weaving
8 products
Welded Wire Mesh & Wire Forming
14 products
Perforated Metal (Punching)
40 products
Expanded Metal (Slit & Stretch)
11 products
Sintered Media (Diffusion Bonding)
19 products
Calendering & Precision Flattening
21 products
Knitted Wire Mesh
4 products
Wedge Wire (Profile Wire Welding)
6 products
Photo-Chemical Etching
25 products
Laser Drilling & Cutting
4 products
Electroforming
5 products
Deep Drawing, Stamping & Forming
44 products
Pleating
3 products
Surface Finishing & Coating
31 productsHave a drawing? Tell us the process you need
Send the part drawing and the quantity; we will confirm the best process and quote within one business day.
Filter Mesh Finder
Filter by mesh type, weave, mesh count / micron rating and material to find the right metal filter mesh and request a quote.