304 Stainless Steel twill weave wire mesh combines the construction of twill weave wire mesh (ISO 9044 / ASTM E2016) with the properties of AISI 304 (1.4301): good general corrosion resistance in atmosphere and fresh water, essentially non-magnetic (annealed), service to approx. +450 °C continuous. This page summarizes the grade data, its behavior in filtration service, comparable alloys, and the specifications supplied.
Why Choose 304 Stainless Steel for Twill Weave Wire Mesh
The standard general-purpose stainless mesh alloy. For twill weave wire mesh, this matters when good general corrosion resistance in atmosphere and fresh water is the controlling requirement.
Alloy Properties
| Grade designation | AISI 304 (1.4301) |
|---|---|
| Magnetic response | Essentially non-magnetic (annealed) |
| Service temperature | approx. +450 °C continuous |
| Corrosion characteristic | Good general corrosion resistance in atmosphere and fresh water |
Corrosion Behavior in Filtration Service
304 gives good resistance to atmospheric exposure, fresh water and most neutral media, and is the standard general-purpose grade for twill weave wire mesh. In chloride-bearing service (seawater, brines, road-salt spray) step up to 316L; in reducing acids consider a nickel alloy.
Comparable Alloys
The direct upgrade from 304 is 316L (chlorides, acids, CIP). Downgrade options for dry, indoor screening are galvanized or plain steel. For heat beyond ~450 °C move to Inconel 600; for seawater immersion consider Monel 400 or duplex 2205 for twill weave wire mesh.
Specifications of Twill Weave Wire Mesh Available in 304 Stainless Steel
| Mesh count | Wire diameter (mm) | Aperture (mm) | Micron rating (u00b5m) | Open area (%) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|---|
| 80-Mesh | 0.160 | 0.158 | 158 | 24.6 | 1.05 | ISO 9044 |
| 100-Mesh | 0.120 | 0.134 | 134 | 27.8 | 0.74 | ISO 9044 |
| 150-Mesh | 0.080 | 0.089 | 89 | 27.8 | 0.49 | ISO 9044 |
| 200-Mesh | 0.060 | 0.067 | 67 | 27.8 | 0.37 | ISO 9044 |
| 250-Mesh | 0.050 | 0.052 | 52 | 25.8 | 0.32 | ISO 9044 |
| 325-Mesh | 0.040 | 0.038 | 38 | 23.8 | 0.27 | ISO 9044 |
| 400-Mesh | 0.036 | 0.028 | 28 | 18.8 | 0.27 | ISO 9044 |
| 500-Mesh | 0.030 | 0.021 | 21 | 16.8 | 0.23 | ISO 9044 |
| 635-Mesh | 0.024 | 0.016 | 16 | 16.0 | 0.19 | ISO 9044 |