The 80 mesh specification of twill weave wire mesh is defined by ISO 9044 / ASTM E2016. The tables below reproduce the standard row — wire diameter, aperture and open area — and convert the count to a micron rating for filtration selection. The technical drawing redraws to the values selected.
80 Mesh Specification Row (ISO 9044 / ASTM E2016)
| Mesh count | Wire diameter (mm) | Aperture (mm) | Micron rating (u00b5m) | Open area (%) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|---|
| 80-Mesh | 0.160 | 0.158 | 158 | 24.6 | 1.05 | ISO 9044 |
80 Mesh to Micron & Aperture
| Openings per inch | 80 |
|---|---|
| Aperture (opening width) | 0.18 mm |
| Micron rating | 178 µm |
| Standard wire diameter | 0.14 mm |
| Open area | 31.2 % |
Aperture = (25.4 mm ÷ mesh count) − wire diameter. The micron rating equals the aperture in micrometres; actual retention also depends on particle shape and cake formation.
Wire Diameter Options at 80 Mesh
| Option | Wire dia | Aperture | Micron | Open area | Weight (SS) |
|---|---|---|---|---|---|
| Heavy wire | 0.182 mm | 0.136 mm | 136 µm | 18.2 % | 1.36 kg/m² |
| Standard wire | 0.140 mm | 0.178 mm | 178 µm | 31.3 % | 0.81 kg/m² |
| Fine wire | 0.105 mm | 0.213 mm | 213 µm | 44.8 % | 0.45 kg/m² |
Heavier wire adds strength and abrasion life but closes the aperture; finer wire opens the aperture and raises throughput at the cost of durability. Specify mesh count AND wire diameter to fix the aperture unambiguously.
Open Area & Flow at 80 Mesh
The standard 80 mesh weave presents an open area of about 31.2%. At this count the mesh presents little flow resistance; selection is normally driven by particle retention and mechanical strength rather than pressure drop.
80 Mesh Cloth Weight
Standard 80 mesh stainless cloth weighs approximately 1.05 kg/m² (density 7.93 g/cm³ basis; brass and copper weave roughly 10% heavier, aluminum about one third). Use this figure for roll handling and freight estimation.
Typical Applications for 80 Mesh Twill Weave Wire Mesh
80 mesh twill weave wire mesh is commonly specified for general straining and sieving, paint and coating filtration, grease filters, insect screening, grain cleaning and pre-filtration ahead of fine media.
Plain, Twill or Dutch Weave at This Rating?
Twill weave passes each weft over and under two warps, which allows a heavier wire at a fine count than plain weave can accommodate. Specify twill when the aperture is fine but the cloth still needs body — typically 200 mesh and finer.
When to Step Up or Down from 80 Mesh
Move to 100 mesh when particles are passing that must be retained; drop back to 60 mesh when the element blinds too quickly or the pressure drop is excessive. In a multi-layer pack, pair this count with a coarser support mesh downstream to carry the pressure load.