Hexagonal Hole Perforated Sheet woven or fabricated in Brass (H65 / CuZn35) keeps its dimensional specification to DIN 24041 (Hv); the alloy determines corrosion behavior (good atmospheric and fresh-water resistance; unsuitable for ammonia service) and the service temperature limit (approx. +200 °C). Both are covered below with the full specification table.
Why Choose Brass for Hexagonal Hole Perforated Sheet
The decorative and spark-resistant screening alloy. For hexagonal hole perforated sheet, this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Corrosion Behavior in Filtration Service
Copper and brass hexagonal hole perforated sheet resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Hexagonal Hole Perforated Sheet Available in Brass
| Across flats (mm) | Pitch (mm) | Open area (%) | Thickness (mm) | Reference standard |
|---|---|---|---|---|
| 3.0 | 4.0 | 51 | 1.0 | DIN 24041 |
| 5.0 | 6.5 | 54 | 1.5 | DIN 24041 |
| 8.0 | 10.0 | 58 | 2.0 | DIN 24041 |
| 10.0 | 12.5 | 58 | 2.0 | DIN 24041 |
| 15.0 | 18.0 | 63 | 3.0 | DIN 24041 |