For hexagonal hole perforated sheet, DIN 24041 (Hv) defines the specification designations and tolerances. The sections below describe the scope, the properties it leaves to companion standards, and the equivalent designations across standards bodies.
DIN 24041 (Hv) — Scope
DIN 24041 (Hv) specifies the designation system, dimensions and tolerances of hexagonal hole perforated sheet — mesh count or nominal opening, wire diameter and the permissible aperture deviations. Alloy chemistry, mechanical testing and delivery condition are governed by separate documents in the same standards family.
Tolerance Classes
DIN 24041 (Hv) defines tolerance limits on the average aperture and on the maximum single aperture, tightening as the aperture gets finer. For test-sieve duty the tighter ISO 3310-1 tolerances apply instead of the general cloth tolerances — specify sieve grade explicitly if the mesh will be used for particle-size analysis.
Specifications Defined by DIN 24041 (Hv)
| Across flats (mm) | Pitch (mm) | Open area (%) | Thickness (mm) | Reference standard |
|---|---|---|---|---|
| 3.0 | 4.0 | 51 | 1.0 | DIN 24041 |
| 5.0 | 6.5 | 54 | 1.5 | DIN 24041 |
| 8.0 | 10.0 | 58 | 2.0 | DIN 24041 |
| 10.0 | 12.5 | 58 | 2.0 | DIN 24041 |
| 15.0 | 18.0 | 63 | 3.0 | DIN 24041 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ ASTM ↔ DIN), they are listed on the parent Hexagonal Hole Perforated Sheet page. Confirm against the specification table on this page — nominally equivalent documents can differ in tolerance limits.
Companion Standards
DIN 24041 (Hv) controls the geometry of hexagonal hole perforated sheet. Companions frequently cited alongside it: ISO 565 / ASTM E11 (test-sieve aperture series), ISO 3310-1 (test sieves of metal wire cloth), ISO 4783 (selection of wire and aperture combinations), ISO 9044 (industrial woven wire cloth), and ISO 2941 (collapse/burst rating for finished filter elements).