Pure Copper twill dutch weave mesh is stocked to ISO 9044. The alloy provides good atmospheric resistance with a stable patina; outstanding conductivity and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Pure Copper for Twill Dutch Weave Mesh
The EMI/RFI shielding and Faraday-cage mesh material. For twill dutch weave mesh, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Twill Dutch Weave Mesh Available in Pure Copper
| Mesh (warp x weft) | Warp wire (mm) | Weft wire (mm) | Nominal filtration (u00b5m) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|
| 80x700 | 0.10 | 0.08 | 40 | 0.75 | ISO 9044 |
| 165x1400 | 0.071 | 0.041 | 10 | 0.55 | ISO 9044 |
| 200x1400 | 0.071 | 0.041 | 8 | 0.55 | ISO 9044 |
| 325x2300 | 0.038 | 0.025 | 5 | 0.35 | ISO 9044 |
| 400x2800 | 0.030 | 0.020 | 4 | 0.28 | ISO 9044 |
| 510x3600 | 0.025 | 0.015 | 2 | 0.22 | ISO 9044 |
