Pure Copper demister pads (mist eliminators) combines the construction of demister pads (mist eliminators) (ASME sizing practice) with the properties of C11000: good atmospheric resistance with a stable patina; outstanding conductivity, non-magnetic, service to approx. +200 °C. This page summarizes the grade data, its behavior in filtration service, comparable alloys, and the specifications supplied.
Why Choose Pure Copper for Demister Pads (Mist Eliminators)
The EMI/RFI shielding and Faraday-cage mesh material. For demister pads (mist eliminators), this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Corrosion Behavior in Filtration Service
Copper and brass demister pads (mist eliminators) resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Specifications of Demister Pads (Mist Eliminators) Available in Pure Copper
| Pad density (kg/mu00b3) | Thickness (mm) | Wire diameter (mm) | Grade | Reference standard |
|---|---|---|---|---|
| 80 | 100 | 0.28 | General purpose | ASME approx. sizing |
| 112 | 100 | 0.28 | Standard | ASME approx. sizing |
| 144 | 100-150 | 0.28 | High efficiency | ASME approx. sizing |
| 192 | 150 | 0.23 | High efficiency | ASME approx. sizing |
| 300 | 150 | 0.15 | Co-knit glass fiber | ASME approx. sizing |