Material page for demister pads (mist eliminators) in Monel 400. The marine and chemical-processing specialist alloy. Covers the grade designation (UNS N04400 (2.4360)), corrosion and magnetic behavior, cleaning and compatibility notes, and the specifications available.
Why Choose Monel 400 for Demister Pads (Mist Eliminators)
The marine and chemical-processing specialist alloy. For demister pads (mist eliminators), this matters when excellent resistance to seawater, hydrofluoric acid and alkalis is the controlling requirement.
Alloy Properties
| Grade designation | UNS N04400 (2.4360) |
|---|---|
| Magnetic response | Slightly magnetic |
| Service temperature | approx. +540 °C |
| Corrosion characteristic | Excellent resistance to seawater, hydrofluoric acid and alkalis |
Cleaning & Compatibility
Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.
Comparable Alloys
Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.
Specifications of Demister Pads (Mist Eliminators) Available in Monel 400
| Pad density (kg/mu00b3) | Thickness (mm) | Wire diameter (mm) | Grade | Reference standard |
|---|---|---|---|---|
| 80 | 100 | 0.28 | General purpose | ASME approx. sizing |
| 112 | 100 | 0.28 | Standard | ASME approx. sizing |
| 144 | 100-150 | 0.28 | High efficiency | ASME approx. sizing |
| 192 | 150 | 0.23 | High efficiency | ASME approx. sizing |
| 300 | 150 | 0.15 | Co-knit glass fiber | ASME approx. sizing |
Where Monel 400 Demister Pads (Mist Eliminators) Is Used
- Oil & gas production: inlet separators, gas scrubbers and glycol contactors.
- Chemical & refining: distillation, absorption and stripping columns.
- Evaporators & desalination: stopping brine and product carry-over into vapor.
- Compressed air & vacuum: oil-mist and water separators.
Ordering Demister Pads (Mist Eliminators) in Monel 400
- Vessel & manway: Pad diameter, number of sections and the largest piece that fits the manway.
- Pad type: Standard density for general duty, high-efficiency for fine mist, open type for fouling service.
- Support grids: Top and bottom grids with tie wires so the pad cannot lift or sag.
Mistakes to Avoid with Demister Pads (Mist Eliminators)
- Undersizing the pad area so gas velocity exceeds the design K-factor.
- Using high-density pads in fouling or waxy service, where they plug.





