Metal Mesh Conveyor Belt — ISO 251 / DIN 22100 belt widths
Metal Mesh Conveyor Belt for carrying parts and food through ovens, furnaces, washers, dryers and freezers on an open woven metal belt that air, heat and liquid pass through. 5 sizes listed, with technical drawing and quotation.
Metal Mesh Conveyor Belt (ISO 251 / DIN 22100 belt widths) — Metal Mesh Conveyor Belts
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Metal Mesh Conveyor Belt
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Metal Mesh Conveyor Belt (ISO 251 / DIN 22100 belt widths) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (ISO 251 / DIN 22100 belt widths)
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Belt type
Aperture (mm)
Wire diameter (mm)
Pitch (mm)
Max temperature (u00b0C)
Alloy
Balanced weave B-24-24-16
8.4
1.6
10.6
1100
SS314
Balanced weave B-48-48-18
3.9
1.2
5.3
900
SS304
Flat-flex 1 u00d7 1 in
25.4
1.8
12.7
400
SS304
Chain-edge 6 mesh
3.5
0.7
4.2
600
SS316
Compound balanced
2.0
1.0
3.0
1150
Inconel 600
Metal Mesh Conveyor Belt (ISO 251 / DIN 22100 belt widths) is used for carrying parts and food through ovens, furnaces, washers, dryers and freezers on an open woven metal belt that air, heat and liquid pass through.
Also known as: metal mesh conveyor belt, metal mesh belt, wire mesh conveyor belt, stainless steel mesh belt, furnace belt
Belt pattern: Balanced weave for heavy furnace loads; flat-flex for food and light loads; chain-edge for driven sprockets.
Alloy: SS304 to 900 °C, SS314 to 1100 °C, Inconel above that.
Width & drive: Specify belt width, length, drive method and edge finish.
Materials
Standard supply is stainless steel 304, Inconel 600; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Track the belt carefully and tension evenly to stop edge wear.
Run new furnace belts up to temperature gradually so they stretch evenly.
Common Mistakes
Choosing an alloy below the furnace temperature, so the belt creeps and stretches.
Mixing belt patterns on one conveyor.
When Metal Mesh Conveyor Belt Is Not the Right Choice
Not for very fine powders that would fall through the openings — a solid or fine-mesh overlay is needed.
Metal Mesh Conveyor Belt is stocked and supplied to order in rolls, cut sheets and fabricated pieces. Pricing starts from approximately US$85.00 per unit for standard specifications in stainless steel 304; final pricing depends on specification, alloy, quantity and fabrication (MOQ applies). Submit your exact configuration with the quote form above.
Metal Mesh Conveyor Belt — ISO 251 / DIN 22100 belt widths
Carrying parts and food through ovens, furnaces, washers, dryers and freezers on an open woven metal belt that air, heat and liquid pass through.
What types of metal mesh conveyor belts are there?
Balanced weave, compound balanced, flat-flex, chain-edge and honeycomb are the most common.
What temperature can a stainless mesh belt run at?
About 900 °C for 304, 1100 °C for 314 and higher for nickel alloys.
How is a mesh belt driven?
By friction drums or by sprockets on chain-edge or flat-flex belts.
Which specifications of Metal Mesh Conveyor Belt does custommetalfilters.com supply?
The table on this page lists 5 standard specifications for Metal Mesh Conveyor Belt, from Balanced weave B-24-24-16 to Compound balanced. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Woven Wire Mesh — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
