Specification data for 100 mesh plain weave wire mesh to ISO 9044 / ASTM E2016: aperture and micron rating, standard and alternative wire diameters, open area, weight per square metre, and the applications this fineness is commonly used for.
100 Mesh Specification Row (ISO 9044 / ASTM E2016)
| Mesh count | Wire diameter (mm) | Aperture (mm) | Micron rating (u00b5m) | Open area (%) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|---|
| 100-Mesh | 0.100 | 0.154 | 154 | 36.8 | 0.51 | ISO 9044 |
100 Mesh to Micron & Aperture
| Openings per inch | 100 |
|---|---|
| Aperture (opening width) | 0.154 mm |
| Micron rating | 154 µm |
| Standard wire diameter | 0.1 mm |
| Open area | 36.7 % |
Aperture = (25.4 mm ÷ mesh count) − wire diameter. The micron rating equals the aperture in micrometres; actual retention also depends on particle shape and cake formation.
Wire Diameter Options at 100 Mesh
| Option | Wire dia | Aperture | Micron | Open area | Weight (SS) |
|---|---|---|---|---|---|
| Heavy wire | 0.130 mm | 0.124 mm | 124 µm | 23.8 % | 0.87 kg/m² |
| Standard wire | 0.100 mm | 0.154 mm | 154 µm | 36.8 % | 0.51 kg/m² |
| Fine wire | 0.075 mm | 0.179 mm | 179 µm | 49.7 % | 0.29 kg/m² |
Heavier wire adds strength and abrasion life but closes the aperture; finer wire opens the aperture and raises throughput at the cost of durability. Specify mesh count AND wire diameter to fix the aperture unambiguously.
Open Area & Flow at 100 Mesh
The standard 100 mesh weave presents an open area of about 36.7%. A common design rule is to keep the clean-mesh approach velocity low enough that initial pressure drop is negligible; the mesh then acts as the cake support.
100 Mesh Cloth Weight
Standard 100 mesh stainless cloth weighs approximately 0.51 kg/m² (density 7.93 g/cm³ basis; brass and copper weave roughly 10% heavier, aluminum about one third). Use this figure for roll handling and freight estimation.
Typical Applications for 100 Mesh Plain Weave Wire Mesh
100 mesh plain weave wire mesh is commonly specified for liquid filtration and clarification, extruder screen packs, hydraulic and fuel strainers, pharmaceutical and food sieving, and laboratory test work.
Plain, Twill or Dutch Weave at This Rating?
Plain square weave is the standard at this count: every opening is a true square of the stated aperture, retention is absolute for hard spherical particles, and the cloth is easy to clean.
When to Step Up or Down from 100 Mesh
Move to 120 mesh when particles are passing that must be retained; drop back to 80 mesh when the element blinds too quickly or the pressure drop is excessive. In a multi-layer pack, pair this count with a coarser support mesh downstream to carry the pressure load.