Material page for vibrating screen mesh (crimped) in Pure Copper. The EMI/RFI shielding and Faraday-cage mesh material. Covers the grade designation (C11000), corrosion and magnetic behavior, cleaning and compatibility notes, and the specifications available.
Why Choose Pure Copper for Vibrating Screen Mesh (Crimped)
The EMI/RFI shielding and Faraday-cage mesh material. For vibrating screen mesh (crimped), this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Corrosion Behavior in Filtration Service
Copper and brass vibrating screen mesh (crimped) resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Specifications of Vibrating Screen Mesh (Crimped) Available in Pure Copper
| Aperture (mm) | Wire diameter (mm) | Crimp type | Material | Typical duty |
|---|---|---|---|---|
| 1.0 | 0.8 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 3.0 | 1.6 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 6.0 | 2.5 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 12.0 | 3.2 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 25.0 | 5.0 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 50.0 | 8.0 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |