Skip to content

Screening Mesh · ISO 4783 crimped

ISO 4783 crimped Vibrating Screen Mesh (Crimped) Specifications

ISO 4783 crimped Vibrating Screen Mesh (Crimped) Specifications reference image

ISO 4783 crimped is the governing standard for vibrating screen mesh (crimped). This page sets out the scope of the document, reproduces the full specification table, and lists the ISO/ASTM/DIN cross-references cited in datasheets and purchase orders.

ISO 4783 crimped — Scope

ISO 4783 crimped specifies the designation system, dimensions and tolerances of vibrating screen mesh (crimped) — mesh count or nominal opening, wire diameter and the permissible aperture deviations. Alloy chemistry, mechanical testing and delivery condition are governed by separate documents in the same standards family.

Tolerance Classes

ISO 4783 crimped defines tolerance limits on the average aperture and on the maximum single aperture, tightening as the aperture gets finer. For test-sieve duty the tighter ISO 3310-1 tolerances apply instead of the general cloth tolerances — specify sieve grade explicitly if the mesh will be used for particle-size analysis.

Specifications Defined by ISO 4783 crimped

Aperture (mm)Wire diameter (mm)Crimp typeMaterialTypical duty
1.00.8Crimped before weaving65 Mn / SS304Quarry & aggregate
3.01.6Crimped before weaving65 Mn / SS304Quarry & aggregate
6.02.5Crimped before weaving65 Mn / SS304Quarry & aggregate
12.03.2Crimped before weaving65 Mn / SS304Quarry & aggregate
25.05.0Crimped before weaving65 Mn / SS304Quarry & aggregate
50.08.0Crimped before weaving65 Mn / SS304Quarry & aggregate

Companion Standards

ISO 4783 crimped controls the geometry of vibrating screen mesh (crimped). Companions frequently cited alongside it: ISO 565 / ASTM E11 (test-sieve aperture series), ISO 3310-1 (test sieves of metal wire cloth), ISO 4783 (selection of wire and aperture combinations), ISO 9044 (industrial woven wire cloth), and ISO 2941 (collapse/burst rating for finished filter elements).

When to Specify ISO 4783 crimped

Choose ISO 4783 crimped for international procurement and OEM supply where ISO documents are the contractual reference. It is the default modern specification for vibrating screen mesh (crimped).

Specifying Vibrating Screen Mesh (Crimped) Beyond the Standard

  • Aperture & wire: Choose the cut size and a wire heavy enough for the feed size.
  • Crimp style: Double crimp, lock crimp, intermediate crimp or flat-top for wear.
  • Steel & hooks: 65Mn high-carbon or stainless wire; hook style to suit the deck.

When Vibrating Screen Mesh (Crimped) Is Not the Right Choice

Not a fine filtration medium.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 4783 crimped)

Aperture (mm)Wire diameter (mm)Crimp typeMaterialTypical duty
1.00.8Crimped before weaving65 Mn / SS304Quarry & aggregate
3.01.6Crimped before weaving65 Mn / SS304Quarry & aggregate
6.02.5Crimped before weaving65 Mn / SS304Quarry & aggregate
12.03.2Crimped before weaving65 Mn / SS304Quarry & aggregate
25.05.0Crimped before weaving65 Mn / SS304Quarry & aggregate
50.08.0Crimped before weaving65 Mn / SS304Quarry & aggregate

Frequently Asked Questions

What crimp types are there?

Double, lock, intermediate and flat-top crimp.

What is crimped wire mesh?

Woven mesh made from pre-crimped wires so openings stay square and rigid.

What does ISO 4783 crimped specify for vibrating screen mesh (crimped)?

ISO 4783 crimped specifies the designation system, dimensions and aperture tolerances of vibrating screen mesh (crimped). Alloy chemistry and element testing are governed by separate companion standards.

Does ISO 4783 crimped guarantee a filtration rating?

No — it fixes the geometry (count, wire, aperture and tolerance). The achieved filtration rating in service also depends on weave type, particle shape and cake formation; element-level ratings are verified per ISO 16889 (beta ratio) or equivalent.

Is mesh to ISO 4783 crimped interchangeable between suppliers?

Dimensionally yes — quoting the standard plus mesh count and wire diameter on the order fixes the cloth unambiguously. Surface finish, weaving quality and packaging can still differ, so qualify a new supplier against a retained sample.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.