Brass vibrating screen mesh (crimped) is stocked to ISO 4783 crimped. The alloy provides good atmospheric and fresh-water resistance; unsuitable for ammonia service and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Brass for Vibrating Screen Mesh (Crimped)
The decorative and spark-resistant screening alloy. For vibrating screen mesh (crimped), this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Vibrating Screen Mesh (Crimped) Available in Brass
| Aperture (mm) | Wire diameter (mm) | Crimp type | Material | Typical duty |
|---|---|---|---|---|
| 1.0 | 0.8 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 3.0 | 1.6 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 6.0 | 2.5 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 12.0 | 3.2 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 25.0 | 5.0 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |
| 50.0 | 8.0 | Crimped before weaving | 65 Mn / SS304 | Quarry & aggregate |