Welded Wire Mesh Rolls for long runs of small-opening welded wire mesh and stainless steel hardware cloth for screening, guarding, enclosures and pest exclusion. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Welded Wire Mesh Rolls
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Welded Wire Mesh Rolls (EN 10223-7 / ASTM A740) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (EN 10223-7 / ASTM A740)
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Opening (mm)
Wire diameter (mm)
Format
Standard size
Reference standard
12.7x12.7
1.6
Panel / roll
1.0 x 2.0 m
EN 10223-7
25.4x25.4
2.0
Panel / roll
1.0 x 2.0 m
EN 10223-7
50.8x50.8
2.5
Panel
1.2 x 2.4 m
EN 10223-7
50x50
4.0
Panel
2.0 x 3.0 m
EN 10223-7
Welded Wire Mesh Rolls (EN 10223-7 / ASTM A740) is used for long runs of small-opening welded wire mesh and stainless steel hardware cloth for screening, guarding, enclosures and pest exclusion.
Also known as: welded wire mesh rolls, stainless steel hardware cloth, galvanized hardware cloth, wire mesh roll, 1/4 inch hardware cloth, 1/8 inch hardware cloth
Opening: 1/8, 1/4, 1/2 or 1 in hardware cloth openings.
Wire gauge: 19–23 gauge; heavier wire for impact.
Finish: Galvanized after welding or stainless 304/316.
Materials
Standard supply is stainless steel 304, stainless steel 316/316L; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Unroll and flatten before cutting; reverse-roll to remove curl.
Wear cut-resistant gloves — cut ends are sharp.
Common Mistakes
Galvanized hardware cloth in corrosive or coastal sites.
Too light a gauge for animals or impact.
When Welded Wire Mesh Rolls Is Not the Right Choice
Not a filtration medium; woven wire cloth is used where a controlled aperture matters.
Welded Wire Mesh Rolls is stocked and supplied to order in rolls, cut sheets and fabricated pieces. Pricing starts from approximately US$7.00 per unit for standard specifications in stainless steel 304; final pricing depends on specification, alloy, quantity and fabrication (MOQ applies). Submit your exact configuration with the quote form above.
Long runs of small-opening welded wire mesh and stainless steel hardware cloth for screening, guarding, enclosures and pest exclusion.
What is hardware cloth?
A small-opening welded (or woven) wire mesh supplied in rolls.
Stainless steel or galvanized hardware cloth?
Stainless lasts far longer in damp or corrosive conditions.
What hardware cloth sizes are common?
1/8, 1/4 and 1/2 inch openings.
What is the specification range of Welded Wire Mesh Rolls?
The table on this page lists 4 standard specifications for Welded Wire Mesh Rolls, from 12.7x12.7 to 50x50. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Welded Wire Mesh — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
