Vacuum Cleaner Cyclone Metal Mesh Filter (IEC 60312-1) is specified where the duty calls for separating hair, lint and coarse dust around the cyclone of bagless stick, canister and robot vacuums with a fine metal mesh shroud that protects the motor filter. The sections below cover the typical end-uses by industry, the mesh, micron and material decisions for each, installation practice, and the applications this product type is not suited to.
Typical Applications for Vacuum Cleaner Cyclone Metal Mesh Filter
Where Vacuum Cleaner Cyclone Metal Mesh Filter is specified and bought:
- Vacuum cleaner OEMs: cyclone shrouds in stick and canister vacuums.
- Robot vacuum makers: bin and cyclone screens.
- Replacement parts: shrouds for cracked plastic originals.
- Wet/dry & workshop vacuums: coarse pre-filter screens.
How to Specify Vacuum Cleaner Cyclone Metal Mesh Filter for Your Application
- Size: Match the cyclone diameter and length.
- Holes: 0.3–0.5 mm, etched or perforated.
- Open area: 25–30 % to keep suction high.
- Standard: Quote IEC 60312-1 and the size designation from the table on the product page, plus any value you changed in the technical drawing.
Handling & Installation Practice
- Empty the bin before it reaches the max line so the shroud is not packed.
- Wash the shroud under water and let it dry fully before refitting.
Common Selection Mistakes with Vacuum Cleaner Cyclone Metal Mesh Filter
- Letting hair wrap around the shroud, which cuts suction.
- Fitting a wet shroud.
Where Vacuum Cleaner Cyclone Metal Mesh Filter Is Not the Right Choice
Not a HEPA or motor filter — those stay downstream of the shroud.
