Skip to content
Request a Quote

Kitchen & Appliance Filters · FDA 21 CFR / EU 1935/2004 food contact · Application guide

What Is Centrifugal Juicer Blade Filter Basket Used For?

Stainless steel centrifugal juicer filter basket with a sharp toothed cutter disc at its base and a fine etched mesh wall

Centrifugal Juicer Blade Filter Basket (FDA 21 CFR / EU 1935/2004 food contact) is specified where the duty calls for shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected. The sections below cover the typical end-uses by industry, the mesh, micron and material decisions for each, installation practice, and the applications this product type is not suited to.

Typical Applications for Centrifugal Juicer Blade Filter Basket

Where Centrifugal Juicer Blade Filter Basket is specified and bought:

  • Juicer OEMs: blade-and-basket assemblies for centrifugal juicers.
  • Spare parts distributors: replacement baskets for worn or cracked originals.
  • Juice bars: high-throughput basket upgrades for commercial centrifugal units.
  • Appliance repair: service kits matched to the motor coupling.

How to Specify Centrifugal Juicer Blade Filter Basket for Your Application

  • Basket geometry: Specify top and disc diameter, height and the drive coupling so the basket is balanced at 6,000–14,000 rpm.
  • Etched hole: Fine slots give clearer juice; round holes clog less with fibrous vegetables.
  • Cutter teeth: More teeth shred finer and raise yield, but need harder steel and accurate grinding.
  • Standard: Quote FDA 21 CFR / EU 1935/2004 food contact and the size designation from the table on the product page, plus any value you changed in the technical drawing.

Handling & Installation Practice

  • Seat the basket fully on the drive hub before locking the lid; an off-center basket vibrates violently.
  • Brush the mesh under running water straight after use; dried pulp in the etched slots will not soak out.

Common Selection Mistakes with Centrifugal Juicer Blade Filter Basket

  • Running a cracked or unbalanced basket — at speed it can shatter the cover.
  • Using a coarse-hole basket for leafy greens, which wrap and blind it quickly.

Where Centrifugal Juicer Blade Filter Basket Is Not the Right Choice

Not for wheatgrass, leafy greens or nut milks — masticating (slow) juicers extract these far better.

If This Construction Is Not the Right Fit

Closely related mesh types for the same duty — compare open area, aperture range and cleanability before you commit.

Slow (Masticating) Juicer Strainer ScreenSlow (Masticating) Juicer Strainer ScreenFDA 21 CFR / EU 1935/2004 food contactSoymilk Maker & Blender Filter CupSoymilk Maker & Blender Filter CupFDA 21 CFR / EU 1935/2004 food contactStainless Steel Mesh Food CoverStainless Steel Mesh Food CoverFDA 21 CFR / EU 1935/2004 food contactWater Pitcher & Dispenser Filter ScreenWater Pitcher & Dispenser Filter ScreenNSF/ANSI 42 / 53 assemblies

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Set the size and options in the drawing above, then send the exact configuration straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (FDA 21 CFR / EU 1935/2004 food contact)

SizeTop diameter (mm)Bottom (blade disc) diameter (mm)Height (mm)Etched hole (mm)Cutter teethThickness (mm)
JB-12012082380.30 u00d7 2.0 slot240.25
JB-14014095450.30 u00d7 2.0 slot280.25
JB-160160110520.35 u00d7 2.2 slot320.30
JB-180180120580.40 round360.30

Frequently Asked Questions

What is Centrifugal Juicer Blade Filter Basket used for?

Shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected.

What does the juicer blade filter basket do?

The toothed disc grates the produce; the spinning mesh wall lets juice through and throws pulp out to the collector.

Why does my centrifugal juicer vibrate?

Uneven pulp build-up or a damaged basket unbalances it. Clean it and check for cracks or bent mesh.

How often should a juicer basket be replaced?

When the teeth dull, the mesh tears or the hub cracks — typically every one to three years in daily use.

Can I get a quote for Centrifugal Juicer Blade Filter Basket to my own drawing?

Yes. Set the size and any custom value in the technical drawing on the product page and send it with the quote form; we reply within one business day.