Slow (Masticating) Juicer Strainer Screen — FDA 21 CFR / EU 1935/2004 food contact
Slow (Masticating) Juicer Strainer Screen for separating juice from pulp in a masticating juicer as the auger presses produce against an etched drum. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Slow (Masticating) Juicer Strainer Screen
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Slow (Masticating) Juicer Strainer Screen (FDA 21 CFR / EU 1935/2004 food contact) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Size
Outer diameter (mm)
Length (mm)
Hole diameter (mm)
Open area (%)
Type
Fine
76
110
0.25
18
Juice u2014 etched SS316 drum
Coarse
76
110
0.60
24
Smoothie u2014 etched drum
Horizontal
58
150
0.30
20
Horizontal auger screen
Wide-chute
92
125
0.25
18
Wide-feed vertical
Slow (Masticating) Juicer Strainer Screen (FDA 21 CFR / EU 1935/2004 food contact) is used for separating juice from pulp in a masticating juicer as the auger presses produce against an etched drum.
How to Specify Slow (Masticating) Juicer Strainer Screen
Drum size: Match outer diameter and length to the auger and chamber; tolerances are tight.
Hole diameter: 0.25 mm for clear juice, 0.6 mm for smoothies and sorbets.
Material: SS316 resists citrus and tomato acids better than plastic or 304 drums.
Materials
Standard supply is stainless steel 316/316L; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Pre-cut fibrous stalks such as celery into short lengths so they do not wrap the auger.
Clean with the supplied rotating brush immediately after juicing.
Common Mistakes
Fitting a fine strainer for frozen-fruit sorbet; it jams the auger.
Leaving pulp to dry in the drum, which permanently blocks the micro-holes.
When Slow (Masticating) Juicer Strainer Screen Is Not the Right Choice
Not for fast, high-volume hard-fruit juicing where a centrifugal juicer is quicker.
Slow (Masticating) Juicer Strainer Screen is made to order as finished parts. Indicative pricing starts from about US$4.50 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.
Slow (Masticating) Juicer Strainer Screen — FDA 21 CFR / EU 1935/2004 food contact
What is Slow (Masticating) Juicer Strainer Screen used for?
Separating juice from pulp in a masticating juicer as the auger presses produce against an etched drum.
Fine or coarse slow-juicer strainer — which should I use?
Fine for clear juice from fruit and greens; coarse for smoothies, nut milks and soft fruit purées.
Why is a stainless strainer better than a plastic one?
It is stiffer, keeps its hole size, resists staining and lasts longer under auger pressure.
How do I unclog a slow-juicer strainer?
Soak in warm water with citric acid and brush from the inside; avoid sharp tools that tear the drum.
What specifications are available for Slow (Masticating) Juicer Strainer Screen?
The table on this page lists 4 standard specifications for Slow (Masticating) Juicer Strainer Screen, from Fine to Wide-chute. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Kitchen & Appliance Filters — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
