Smartwatch & Wearable Vent Mesh is used for protecting the speaker, buzzer, barometric pressure and microphone ports of smartwatches and fitness wearables from sweat, sand and water. ISO 22810 is the reference cited for it on drawings, datasheets and purchase orders.
What ISO 22810 Means for Smartwatch & Wearable Vent Mesh
The dimensions in the table below are supplied to suit ISO 22810. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Smartwatch & Wearable Vent Mesh Dimensions
| Part | Length (mm) | Width (mm) | Thickness (mm) | Hole diameter (mm) | Open area (%) | Function |
|---|---|---|---|---|---|---|
| Speaker vent | 8.0 | 1.2 | 0.05 | 0.035 | 18 | Speaker / buzzer |
| Barometer port | 2.5 | 2.5 | 0.04 | 0.025 | 12 | Pressure equalizing |
| Mic port | 1.8 | 1.8 | 0.04 | 0.030 | 15 | Microphone |
Specifying Smartwatch & Wearable Vent Mesh Beyond the Standard
- Corrosion resistance: Use SS316L — sweat chlorides pit 304 mesh within months.
- Pressure response: Barometer ports need low-resistance mesh so readings follow altitude changes without lag.
- Size & thickness: Slots can be under 1.5 mm wide; 0.04–0.05 mm mesh keeps the stack thin.
When Smartwatch & Wearable Vent Mesh Is Not the Right Choice
Not by itself a water seal — water resistance ratings come from the membrane and gaskets behind the mesh.
