Industrial Fryer Mesh Conveyor Belt is used for carrying snacks, chips, nuts and coated products through continuous industrial fryers on open stainless mesh belts that let oil circulate and drain. FDA 21 CFR is the reference cited for it on drawings, datasheets and purchase orders.
What FDA 21 CFR Means for Industrial Fryer Mesh Conveyor Belt
The dimensions in the table below are supplied to suit FDA 21 CFR. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Industrial Fryer Mesh Conveyor Belt Dimensions
| Belt type | Aperture (mm) | Wire diameter (mm) | Pitch (mm) | Max temperature (u00b0C) | Alloy |
|---|---|---|---|---|---|
| Flat-flex 12.7 | 11.0 | 1.2 | 12.7 | 260 | SS304 |
| Balanced weave B-36 | 5.5 | 1.4 | 7.0 | 260 | SS304 |
| Submerger top belt | 20.0 | 2.0 | 25.4 | 260 | SS304 |
| Honeycomb 10 | 10.0 | 1.2 | 10.0 | 260 | SS316 |
Specifying Industrial Fryer Mesh Conveyor Belt Beyond the Standard
- Belt type: Flat-flex for light products and easy cleaning; balanced weave for heavy loads; honeycomb for maximum open area.
- Width, pitch & drive: Match fryer width, sprocket pitch and drive system exactly.
- Alloy: SS304 for frying oil; SS316 where salt or acidic seasonings are present.
When Industrial Fryer Mesh Conveyor Belt Is Not the Right Choice
Not suited to batter that drips through the openings before it sets — use a solid or fine-mesh infeed belt there.
