Sintered Metal Powder Filters woven or fabricated in 304 Stainless Steel (AISI 304 (1.4301)) keeps its dimensional specification to ISO 4022; the alloy determines corrosion behavior (good general corrosion resistance in atmosphere and fresh water) and the service temperature limit (approx. +450 °C continuous). Both are covered below with the full specification table.
Why Choose 304 Stainless Steel for Sintered Metal Powder Filters
The standard general-purpose stainless mesh alloy. For sintered metal powder filters, this matters when good general corrosion resistance in atmosphere and fresh water is the controlling requirement.
Alloy Properties
| Grade designation | AISI 304 (1.4301) |
|---|---|
| Magnetic response | Essentially non-magnetic (annealed) |
| Service temperature | approx. +450 °C continuous |
| Corrosion characteristic | Good general corrosion resistance in atmosphere and fresh water |
Cleaning & Compatibility
Stainless sintered metal powder filters can be cleaned by backflush, ultrasonic bath, steam and most CIP chemistry. Two cautions: (1) avoid extended contact with hydrochloric acid or hypochlorite sanitizers, which pit even 316; (2) where the mesh contacts carbon steel during fabrication or service, iron pick-up can rust-stain the surface — specify passivation after fabrication.
Comparable Alloys
The direct upgrade from 304 is 316L (chlorides, acids, CIP). Downgrade options for dry, indoor screening are galvanized or plain steel. For heat beyond ~450 °C move to Inconel 600; for seawater immersion consider Monel 400 or duplex 2205 for sintered metal powder filters.
Specifications of Sintered Metal Powder Filters Available in 304 Stainless Steel
| Micron rating (u00b5m) | Thickness (mm) | Form | Available shapes | Reference standard |
|---|---|---|---|---|
| 0.5 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 2 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 10 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 40 | 2.0-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 100 | 2.0-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |