Brass sintered metal powder filters is stocked to ISO 4022. The alloy provides good atmospheric and fresh-water resistance; unsuitable for ammonia service and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Brass for Sintered Metal Powder Filters
The decorative and spark-resistant screening alloy. For sintered metal powder filters, this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Corrosion Behavior in Filtration Service
Copper and brass sintered metal powder filters resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Specifications of Sintered Metal Powder Filters Available in Brass
| Micron rating (u00b5m) | Thickness (mm) | Form | Available shapes | Reference standard |
|---|---|---|---|---|
| 0.5 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 2 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 10 | 1.5-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 40 | 2.0-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |
| 100 | 2.0-3.0 | Powder | Disc / cup / tube / sheet | ISO 4022 |