For slotted hole perforated sheet in Inconel 600, the controlling selection factors are the media being filtered, the cleaning regime and the service temperature. The grade data for Inconel 600 is summarized below together with every specification supplied.
Why Choose Inconel 600 for Slotted Hole Perforated Sheet
The high-temperature furnace and hot-gas filtration alloy. For slotted hole perforated sheet, this matters when excellent oxidation resistance at extreme temperature is the controlling requirement.
Alloy Properties
| Grade designation | UNS N06600 (2.4816) |
|---|---|
| Magnetic response | Essentially non-magnetic |
| Service temperature | approx. +1000 °C (short excursions higher) |
| Corrosion characteristic | Excellent oxidation resistance at extreme temperature |
Cleaning & Compatibility
Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.
Comparable Alloys
Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.
Specifications of Slotted Hole Perforated Sheet Available in Inconel 600
| Slot width (mm) | Slot length (mm) | Bridge (mm) | Open area (%) | Thickness (mm) | Reference standard |
|---|---|---|---|---|---|
| 0.5 | 10 | 1.0 | 28 | 0.8 | DIN 24041 |
| 1.0 | 12 | 1.5 | 33 | 1.0 | DIN 24041 |
| 1.5 | 20 | 2.0 | 38 | 1.2 | DIN 24041 |
| 2.0 | 20 | 2.5 | 40 | 1.5 | DIN 24041 |
| 3.0 | 25 | 3.0 | 43 | 2.0 | DIN 24041 |
| 5.0 | 40 | 4.0 | 45 | 2.0 | DIN 24041 |