Material page for slotted hole perforated sheet in Pure Copper. The EMI/RFI shielding and Faraday-cage mesh material. Covers the grade designation (C11000), corrosion and magnetic behavior, cleaning and compatibility notes, and the specifications available.
Why Choose Pure Copper for Slotted Hole Perforated Sheet
The EMI/RFI shielding and Faraday-cage mesh material. For slotted hole perforated sheet, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Slotted Hole Perforated Sheet Available in Pure Copper
| Slot width (mm) | Slot length (mm) | Bridge (mm) | Open area (%) | Thickness (mm) | Reference standard |
|---|---|---|---|---|---|
| 0.5 | 10 | 1.0 | 28 | 0.8 | DIN 24041 |
| 1.0 | 12 | 1.5 | 33 | 1.0 | DIN 24041 |
| 1.5 | 20 | 2.0 | 38 | 1.2 | DIN 24041 |
| 2.0 | 20 | 2.5 | 40 | 1.5 | DIN 24041 |
| 3.0 | 25 | 3.0 | 43 | 2.0 | DIN 24041 |
| 5.0 | 40 | 4.0 | 45 | 2.0 | DIN 24041 |