Brass wedge wire screen panels combines the construction of wedge wire screen panels (Industry standard (V-wire)) with the properties of H65 / CuZn35: good atmospheric and fresh-water resistance; unsuitable for ammonia service, non-magnetic, service to approx. +200 °C. This page summarizes the grade data, its behavior in filtration service, comparable alloys, and the specifications supplied.
Why Choose Brass for Wedge Wire Screen Panels
The decorative and spark-resistant screening alloy. For wedge wire screen panels, this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Wedge Wire Screen Panels Available in Brass
| Slot opening (mm) | Wire profile (mm) | Support rod (mm) | Open area (%) | Tolerance |
|---|---|---|---|---|
| 0.05 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 8 | Slot tolerance u00b10.02 |
| 0.10 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 12 | Slot tolerance u00b10.02 |
| 0.25 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 18 | Slot tolerance u00b10.03 |
| 0.50 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 25 | Slot tolerance u00b10.05 |
| 1.00 | V-profile 3.0 x 5.0 | Rod 5 x 8 | 33 | Slot tolerance u00b10.05 |
| 3.00 | V-profile 3.0 x 5.0 | Rod 5 x 8 | 50 | Slot tolerance u00b10.10 |
| 6.00 | V-profile 3.3 x 6.0 | Rod 5 x 8 | 60 | Slot tolerance u00b10.10 |