Wedge Wire Screen Panels — Industry standard (V-wire)
Wedge Wire Screen Panels for dewatering, sizing and straining with wedge wire screen panels — V-shaped profile wires welded to support rods so each slot widens behind the face and does not clog. 7 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Wedge Wire Screen Panels
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Wedge Wire Screen Panels (Industry standard (V-wire)) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (Industry standard (V-wire))
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Slot opening (mm)
Wire profile (mm)
Support rod (mm)
Open area (%)
Tolerance
0.05
V-profile 1.5 x 2.5
Rod 3 x 5
8
Slot tolerance u00b10.02
0.10
V-profile 1.5 x 2.5
Rod 3 x 5
12
Slot tolerance u00b10.02
0.25
V-profile 2.2 x 3.0
Rod 3 x 5
18
Slot tolerance u00b10.03
0.50
V-profile 2.2 x 3.0
Rod 3 x 5
25
Slot tolerance u00b10.05
1.00
V-profile 3.0 x 5.0
Rod 5 x 8
33
Slot tolerance u00b10.05
3.00
V-profile 3.0 x 5.0
Rod 5 x 8
50
Slot tolerance u00b10.10
6.00
V-profile 3.3 x 6.0
Rod 5 x 8
60
Slot tolerance u00b10.10
Wedge Wire Screen Panels (Industry standard (V-wire)) is used for dewatering, sizing and straining with wedge wire screen panels — V-shaped profile wires welded to support rods so each slot widens behind the face and does not clog.
Also known as: wedge wire screen, v-wire screen, profile wire screen, sieve bend screen
Slot width: From 0.05 mm to 10 mm; specify slot tolerance for fine duties.
Profile & support: Profile wire size and support-rod pitch for the load and span.
Panel form: Flat, curved (sieve bend) or polyurethane-framed modular panels.
Materials
Standard supply is stainless steel 304, stainless steel 316/316L; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Install with the slot flat face toward the flow so particles pass rather than wedge.
Support panel edges along the full length to prevent profile wires lifting.
Common Mistakes
Mounting the panel upside down, so the slot narrows downstream and blinds.
Choosing a profile too small for impact loads on dewatering screens.
When Wedge Wire Screen Panels Is Not the Right Choice
Not for very fine, sub-50 µm filtration where woven dutch weave or sintered media perform better.
Wedge Wire Screen Panels is stocked and supplied to order in rolls, cut sheets and fabricated pieces. Pricing starts from approximately US$90.00 per unit for standard specifications in stainless steel 304; final pricing depends on specification, alloy, quantity and fabrication (MOQ applies). Submit your exact configuration with the quote form above.
Wedge Wire Screen Panels — Industry standard (V-wire)
Dewatering, sizing and straining with wedge wire screen panels — V-shaped profile wires welded to support rods so each slot widens behind the face and does not clog.
What is a wedge wire screen?
A screen made of V-profile wires welded to support rods, forming continuous slots.
Why does wedge wire resist clogging?
The slot widens behind the screen face, so a particle that enters passes through.
What slot widths can wedge wire panels have?
From about 0.05 mm up to 10 mm.
Which specifications of Wedge Wire Screen Panels does custommetalfilters.com supply?
The table on this page lists 7 standard specifications for Wedge Wire Screen Panels, from 0.05 to 6.00. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Wedge Wire Screen — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
