Faucet Aerator Mesh Insert is selected when an assembly or process calls for mixing air into tap water and breaking the stream into a soft, non-splashing jet through stacked stainless mesh discs. This application guide to the ASME A112.18.1 / EN 246 type covers concrete end-uses, the specification checklist, correct installation, and where an alternative mesh or filter medium performs better.
Typical Applications for Faucet Aerator Mesh Insert
Where Faucet Aerator Mesh Insert is specified and bought:
- Faucet OEMs: aerator inserts in kitchen and basin taps.
- Water utilities: water-saving retrofit kits.
- Hotels & offices: low-flow conversions.
- Hardware retail: replacement aerators.
How to Specify Faucet Aerator Mesh Insert for Your Application
- Thread: M22 × 1 female or M24 × 1 male for most taps.
- Flow class: 4–8 L/min set by the restrictor.
- Layers: Three stacked discs for a fully aerated stream.
- Standard: Quote ASME A112.18.1 / EN 246 and the size designation from the table on the product page, plus any value you changed in the technical drawing.
Handling & Installation Practice
- Unscrew the aerator and rinse the discs when the stream becomes uneven.
- Wrap the wrench jaws in cloth to protect plated finishes.
Common Selection Mistakes with Faucet Aerator Mesh Insert
- Mixing up M22 and M24 sizes.
- Removing mesh layers to increase flow, which causes splashing.
Where Faucet Aerator Mesh Insert Is Not the Right Choice
Not for sediment-heavy well water without an upstream filter.
