Shower Hose & Inlet Filter Washer Screen for catching grit and pipe scale at the shower hose or mixer inlet so the head, thermostatic cartridge and diverter stay clear. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Shower Hose & Inlet Filter Washer Screen
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Shower Hose & Inlet Filter Washer Screen (ISO 228-1 thread sizes) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (ISO 228-1 thread sizes)
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Size
Diameter (mm)
Mesh
Micron rating (u00b5m)
Rim
Thread
G 1/2
19.5
60-Mesh SS304
233
EPDM rubber
G 1/2
G 3/4
24.5
60-Mesh SS304
233
EPDM rubber
G 3/4
G 1/2 fine
19.5
100-Mesh SS304
154
EPDM rubber
G 1/2
Cone G 1/2
15.0
40-Mesh SS304
385
Pressed cup
G 1/2
Shower Hose & Inlet Filter Washer Screen (ISO 228-1 thread sizes) is used for catching grit and pipe scale at the shower hose or mixer inlet so the head, thermostatic cartridge and diverter stay clear.
How to Specify Shower Hose & Inlet Filter Washer Screen
Thread size: G 1/2 for hoses and heads, G 3/4 for mixer inlets.
Mesh: 60-mesh standard; 100-mesh where sand is present.
Seal: An EPDM rim lets the screen also act as the joint seal.
Materials
Standard supply is stainless steel 304; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Hand-tighten hose nuts — the rubber rim seals, not the thread.
Clean the screen after any mains water work, when pipe scale is released.
Common Mistakes
Leaving the screen out after cleaning, so grit damages the thermostatic cartridge.
Stacking two washers, which leaks.
When Shower Hose & Inlet Filter Washer Screen Is Not the Right Choice
Shower Hose & Inlet Filter Washer Screen is made to order as finished parts. Indicative pricing starts from about US$0.060 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.
What is Shower Hose & Inlet Filter Washer Screen used for?
Catching grit and pipe scale at the shower hose or mixer inlet so the head, thermostatic cartridge and diverter stay clear.
Why is my shower pressure suddenly low?
A blocked inlet filter washer is common after plumbing work.
Can I remove the shower filter washer?
Better to clean it — it protects the head and valve.
What size is a shower hose washer?
Most hoses use G 1/2, about 19.5 mm.
What is the specification range of Shower Hose & Inlet Filter Washer Screen?
The table on this page lists 4 standard specifications for Shower Hose & Inlet Filter Washer Screen, from G 1/2 to Cone G 1/2. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Bathroom & Personal Care Mesh — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
