Oil Pickup & Transmission Screen for protecting the engine oil pump and transmission hydraulics from large debris at the sump pickup and valve-body inlet. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Oil Pickup & Transmission Screen
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Oil Pickup & Transmission Screen (SAE J1858) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (SAE J1858)
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Size
Diameter (mm)
Mesh
Micron rating (u00b5m)
Frame
Pickup 60
60
30-Mesh
547
Pressed steel cup
Pickup 80
80
30-Mesh
547
Pressed steel cup
ATF screen 120
120
60-Mesh
233
Molded nylon frame
Valve body 40
40
100-Mesh
154
Crimped SS ring
Oil Pickup & Transmission Screen (SAE J1858) is used for protecting the engine oil pump and transmission hydraulics from large debris at the sump pickup and valve-body inlet.
Mesh count: 30-mesh at the oil pickup; 60–100 mesh at ATF valve bodies.
Frame: Pressed steel cup or molded nylon frame.
Fit: Matches the pickup tube and seal.
Materials
Standard supply is stainless steel 304; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Inspect the screen whenever the oil pan comes off — metal or sludge on it indicates internal problems.
Always replace the O-ring or gasket on the pickup.
Common Mistakes
Ignoring a sludged pickup, which causes low oil pressure.
Using a finer screen than specified, which restricts cold oil flow.
When Oil Pickup & Transmission Screen Is Not the Right Choice
Not the engine oil filter — it only stops large debris.
Oil Pickup & Transmission Screen is made to order as finished parts. Indicative pricing starts from about US$1.80 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.
What is Oil Pickup & Transmission Screen used for?
Protecting the engine oil pump and transmission hydraulics from large debris at the sump pickup and valve-body inlet.
What does the oil pickup screen do?
It keeps large debris out of the oil pump.
What happens if the oil pickup screen clogs?
Oil pressure drops, especially at high rpm or cold starts.
What does an ATF screen protect?
The transmission pump and valve body.
Which specifications of Oil Pickup & Transmission Screen does custommetalfilters.com supply?
The table on this page lists 4 standard specifications for Oil Pickup & Transmission Screen, from Pickup 60 to Valve body 40. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Automotive Mesh & Filters — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
