Fuel Injector & Inlet Filter Basket for catching the last particles at the fuel inlet of gasoline and diesel injectors, where even small debris would block the nozzle. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Fuel Injector & Inlet Filter Basket
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Fuel Injector & Inlet Filter Basket (SAE J1832) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (SAE J1832)
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Size
Outer diameter (mm)
Length (mm)
Micron rating (u00b5m)
Media
u00d83.0
3.0
9
25
Sintered / etched SS
u00d84.0
4.0
11
30
SS316 dutch weave
u00d85.5
5.5
12
40
SS316 dutch weave
u00d86.8
6.8
14
40
SS316 dutch weave
Fuel Injector & Inlet Filter Basket (SAE J1832) is used for catching the last particles at the fuel inlet of gasoline and diesel injectors, where even small debris would block the nozzle.
How to Specify Fuel Injector & Inlet Filter Basket
Dimensions: Outer diameter and length must suit the injector inlet bore.
Rating: 25–40 µm dutch-weave or etched media.
Retention: A tight press fit so the basket cannot move into the injector.
Materials
Standard supply is stainless steel 316/316L; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Install with the proper press tool, square to the bore.
Always fit new baskets after cleaning injectors.
Common Mistakes
Reusing old baskets after cleaning, which re-releases trapped debris.
Pushing baskets in crooked, crushing the mesh.
When Fuel Injector & Inlet Filter Basket Is Not the Right Choice
Not a replacement for the vehicle's main fuel filter.
Fuel Injector & Inlet Filter Basket is made to order as finished parts. Indicative pricing starts from about US$0.12 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.
What is Fuel Injector & Inlet Filter Basket used for?
Catching the last particles at the fuel inlet of gasoline and diesel injectors, where even small debris would block the nozzle.
Where is the fuel injector filter basket?
Inside the top inlet of the injector.
Should injector filter baskets be replaced at rebuild?
Yes — always fit new baskets after cleaning.
What micron rating do injector baskets have?
Typically 25–40 µm.
Which specifications of Fuel Injector & Inlet Filter Basket does custommetalfilters.com supply?
The table on this page lists 4 standard specifications for Fuel Injector & Inlet Filter Basket, from u00d83.0 to u00d86.8. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Automotive Mesh & Filters — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
