Skip to content

Automotive Mesh & Filters · Engine Air & Cooling Mesh

Motorcycle & ATV Spark Arrester Screen — USDA Forest Service 5100-1 / SAE J350

Motorcycle & ATV Spark Arrester Screen for trapping glowing carbon particles inside motorcycle, ATV and dirt-bike silencers so they cannot ignite dry vegetation. 3 sizes listed, with technical drawing and quotation.

A perforated stainless steel spark arrester insert being removed from the tip of a dirt bike exhaust silencer
Motorcycle & ATV Spark Arrester Screen (USDA Forest Service 5100-1 / SAE J350) — Engine Air & Cooling Mesh

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quotation for Motorcycle & ATV Spark Arrester Screen

Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Motorcycle & ATV Spark Arrester Screen (USDA Forest Service 5100-1 / SAE J350) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (USDA Forest Service 5100-1 / SAE J350)

Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.

SizeOuter diameter (mm)Length (mm)Hole diameter (mm)Construction
Insert 3838900.6Perforated SS304 tube
Insert 45451100.6Perforated SS304 tube
Cone 5050750.6Woven 30-mesh cone

Motorcycle & ATV Spark Arrester Screen (USDA Forest Service 5100-1 / SAE J350) is used for trapping glowing carbon particles inside motorcycle, ATV and dirt-bike silencers so they cannot ignite dry vegetation.

Made by: Woven Wire Mesh (Weaving) · Perforated Metal (Punching) · Deep Drawing, Stamping & Forming

Where Motorcycle & ATV Spark Arrester Screen Is Used

  • Trail & enduro riders: arrester inserts required on public forest land.
  • Exhaust manufacturers: USDA-approved arrester tips.
  • Forestry & landscaping: chainsaws, brush cutters and small engines.
  • Portable generators: exhaust spark screens for campsites.

Read the full application guide for Motorcycle & ATV Spark Arrester Screen →

How to Specify Motorcycle & ATV Spark Arrester Screen

  • Hole size: 0.6 mm (0.023 in) openings meet USDA Forest Service 5100-1.
  • Fit: Match the silencer tip diameter and retaining screw pattern.
  • Material: SS304 resists exhaust heat and corrosion.

Materials

Standard supply is stainless steel 304; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.

Fitting & Care

  • Burn off or brush carbon deposits every few rides; a clogged screen costs power.
  • Check the retaining screws — a loose insert can rattle out.

Common Mistakes

  • Removing the arrester, which is illegal on many trails and voids insurance.
  • Letting carbon build up until the engine runs rich and loses power.

When Motorcycle & ATV Spark Arrester Screen Is Not the Right Choice

Not a muffler; it does not reduce noise significantly.

Related Mesh Products

Pricing

Motorcycle & ATV Spark Arrester Screen is made to order as finished parts. Indicative pricing starts from about US$3.40 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.

Frequently Asked Questions

What is Motorcycle & ATV Spark Arrester Screen used for?

Trapping glowing carbon particles inside motorcycle, ATV and dirt-bike silencers so they cannot ignite dry vegetation.

Is a spark arrester required on dirt bikes?

On US federal forest land and many state trails, yes.

How do I clean a motorcycle spark arrester?

Remove it and burn off or brush away carbon, then refit.

What size are spark arrester holes?

About 0.6 mm.

What specifications are available for Motorcycle & ATV Spark Arrester Screen?

The table on this page lists 3 standard specifications for Motorcycle & ATV Spark Arrester Screen, from Insert 38 to Cone 50. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.

How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.