Skip to content
Request a Quote

Chemically Etched Filters & Mesh · Etched Precision Filter Parts

Etched Sensor & Headlamp Vent Mesh — Photo-chemical machining to drawing (ISO 2768-f)

Etched Sensor & Headlamp Vent Mesh for letting automotive headlamps, ECUs, cameras and LiDAR housings breathe through etched vent meshes that block debris and support a waterproof membrane. 3 sizes listed, with technical drawing and quotation.

Etched Sensor & Headlamp Vent Mesh (Photo-chemical machining to drawing (ISO 2768-f)) — Etched Precision Filter Parts

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quotation for Etched Sensor & Headlamp Vent Mesh

Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Etched Sensor & Headlamp Vent Mesh (Photo-chemical machining to drawing (ISO 2768-f)) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Photo-chemical machining to drawing (ISO 2768-f))

Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.

PartLength (mm)Width (mm)Thickness (mm)Hole diameter (mm)Open area (%)Function
Vent u00d86660.050.0520Headlamp breather
Vent u00d81010100.080.0824ECU / sensor housing
Rect 15 u00d7 51550.080.0824Camera / LiDAR housing

Etched Sensor & Headlamp Vent Mesh (Photo-chemical machining to drawing (ISO 2768-f)) is used for letting automotive headlamps, ECUs, cameras and LiDAR housings breathe through etched vent meshes that block debris and support a waterproof membrane.

Made by: Photo-Chemical Etching · Filter Fabrication & Assembly

Where Etched Sensor & Headlamp Vent Mesh Is Used

  • Automotive lighting: headlamp and tail-lamp breather vents that prevent fogging.
  • Vehicle electronics: ECU, inverter and sensor housings.
  • ADAS sensors: camera and LiDAR housing vents.
  • EV components: charge-port and battery junction-box vents.

Read the full application guide for Etched Sensor & Headlamp Vent Mesh →

How to Specify Etched Sensor & Headlamp Vent Mesh

  • Size: Round Ø6–10 mm or rectangular patches to the housing port.
  • Holes: 0.05–0.08 mm etched holes protect the membrane from stone and jet damage.
  • Stack: Bond over an ePTFE membrane for IP67/IP69K performance.

Materials

Standard supply is stainless steel 304; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.

Fitting & Care

  • Bond onto a clean, primed surface and press the full adhesive ring.
  • Position vents away from direct high-pressure wash jets where possible.

Common Mistakes

  • Using the mesh without a membrane, so water enters.
  • Low-temperature adhesive that lets go under headlamp heat.

When Etched Sensor & Headlamp Vent Mesh Is Not the Right Choice

Not waterproof on its own; the membrane provides the seal.

Related Mesh Products

Pricing

Etched Sensor & Headlamp Vent Mesh is made to order as finished parts. Indicative pricing starts from about US$0.15 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.

Frequently Asked Questions

What is Etched Sensor & Headlamp Vent Mesh used for?

Letting automotive headlamps, ECUs, cameras and LiDAR housings breathe through etched vent meshes that block debris and support a waterproof membrane.

Why do headlamps need vents?

To equalize pressure and let moisture escape so the lens does not fog.

What does the metal mesh add?

It protects the membrane from stones, ice and pressure-washer jets.

Which material?

SS304 etched foil.

Which specifications of Etched Sensor & Headlamp Vent Mesh does custommetalfilters.com supply?

The table on this page lists 3 standard specifications for Etched Sensor & Headlamp Vent Mesh, from Vent u00d86 to Rect 15 u00d7 5. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.

How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.

Related Mesh Products

Closely related constructions in Chemically Etched Filters & Mesh — compare aperture range, open area and cleanability.

Etched Titanium Porous Plate for ElectrolyzersEtched Titanium Porous Plate for ElectrolyzersISO 22734 electrolyzer stacksFormed Etched Cup FilterFormed Etched Cup FilterPhoto-chemical machining to drawing (ISO 2768-f)Etched Fuel Injector Spray PlateEtched Fuel Injector Spray PlateInjector OEM drawingEtched Hexagonal Shielding MeshEtched Hexagonal Shielding MeshPhoto-chemical machining to drawing (ISO 2768-f)
Exit mobile version