Centrifugal Juicer Blade Filter Basket — FDA 21 CFR / EU 1935/2004 food contact
Centrifugal Juicer Blade Filter Basket for shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected. 4 sizes listed, with technical drawing and quotation.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Centrifugal Juicer Blade Filter Basket
Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Centrifugal Juicer Blade Filter Basket (FDA 21 CFR / EU 1935/2004 food contact) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.
Size
Top diameter (mm)
Bottom (blade disc) diameter (mm)
Height (mm)
Etched hole (mm)
Cutter teeth
Thickness (mm)
JB-120
120
82
38
0.30 u00d7 2.0 slot
24
0.25
JB-140
140
95
45
0.30 u00d7 2.0 slot
28
0.25
JB-160
160
110
52
0.35 u00d7 2.2 slot
32
0.30
JB-180
180
120
58
0.40 round
36
0.30
Centrifugal Juicer Blade Filter Basket (FDA 21 CFR / EU 1935/2004 food contact) is used for shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected.
How to Specify Centrifugal Juicer Blade Filter Basket
Basket geometry: Specify top and disc diameter, height and the drive coupling so the basket is balanced at 6,000–14,000 rpm.
Etched hole: Fine slots give clearer juice; round holes clog less with fibrous vegetables.
Cutter teeth: More teeth shred finer and raise yield, but need harder steel and accurate grinding.
Materials
Standard supply is stainless steel 304, stainless steel 316/316L; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.
Fitting & Care
Seat the basket fully on the drive hub before locking the lid; an off-center basket vibrates violently.
Brush the mesh under running water straight after use; dried pulp in the etched slots will not soak out.
Common Mistakes
Running a cracked or unbalanced basket — at speed it can shatter the cover.
Using a coarse-hole basket for leafy greens, which wrap and blind it quickly.
When Centrifugal Juicer Blade Filter Basket Is Not the Right Choice
Not for wheatgrass, leafy greens or nut milks — masticating (slow) juicers extract these far better.
Centrifugal Juicer Blade Filter Basket is made to order as finished parts. Indicative pricing starts from about US$3.80 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.
Centrifugal Juicer Blade Filter Basket — FDA 21 CFR / EU 1935/2004 food contact
What is Centrifugal Juicer Blade Filter Basket used for?
Shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected.
What does the juicer blade filter basket do?
The toothed disc grates the produce; the spinning mesh wall lets juice through and throws pulp out to the collector.
Why does my centrifugal juicer vibrate?
Uneven pulp build-up or a damaged basket unbalances it. Clean it and check for cracks or bent mesh.
How often should a juicer basket be replaced?
When the teeth dull, the mesh tears or the hub cracks — typically every one to three years in daily use.
What is the specification range of Centrifugal Juicer Blade Filter Basket?
The table on this page lists 4 standard specifications for Centrifugal Juicer Blade Filter Basket, from JB-120 to JB-180. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.
Related Mesh Products
Closely related constructions in Kitchen & Appliance Filters — compare aperture range, open area and cleanability.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
