Ultrasonic Vibrating Sieve Screen is used for sieving fine and electrostatic powders on vibratory sifters with a stainless mesh screen driven by an ultrasonic transducer ring that stops blinding. Sifter OEM frames is the reference cited for it on drawings, datasheets and purchase orders.
What Sifter OEM frames Means for Ultrasonic Vibrating Sieve Screen
The dimensions in the table below are supplied to suit Sifter OEM frames. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Ultrasonic Vibrating Sieve Screen Dimensions
| Size | Frame diameter (mm) | Frame height (mm) | Mesh count | Aperture (mm) | Transducer |
|---|---|---|---|---|---|
| 600 / 200-mesh | 600 | 60 | 200-Mesh | 0.074 | 36 kHz ring |
| 800 / 325-mesh | 800 | 60 | 325-Mesh | 0.042 | 36 kHz ring |
| 1000 / 400-mesh | 1000 | 80 | 400-Mesh | 0.034 | 2 u00d7 36 kHz |
| 1500 / 500-mesh | 1500 | 80 | 500-Mesh | 0.026 | 3 u00d7 36 kHz |
Specifying Ultrasonic Vibrating Sieve Screen Beyond the Standard
- Frame size: Match the sifter diameter (600–1500 mm).
- Mesh: 200–500 mesh; ultrasonic drive becomes essential below about 100 µm.
- Transducer & cable: Ring transducer frequency and generator compatibility.
When Ultrasonic Vibrating Sieve Screen Is Not the Right Choice
Not needed for coarse free-flowing products.
