Ultrasonic Vibrating Sieve Screen is used for sieving fine and electrostatic powders on vibratory sifters with a stainless mesh screen driven by an ultrasonic transducer ring that stops blinding. ISO 3310-1 cloth is the reference cited for it on drawings, datasheets and purchase orders.
What ISO 3310-1 cloth Means for Ultrasonic Vibrating Sieve Screen
The dimensions in the table below are supplied to suit ISO 3310-1 cloth. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Ultrasonic Vibrating Sieve Screen Dimensions
| Size | Frame diameter (mm) | Frame height (mm) | Mesh count | Aperture (mm) | Transducer |
|---|---|---|---|---|---|
| 600 / 200-mesh | 600 | 60 | 200-Mesh | 0.074 | 36 kHz ring |
| 800 / 325-mesh | 800 | 60 | 325-Mesh | 0.042 | 36 kHz ring |
| 1000 / 400-mesh | 1000 | 80 | 400-Mesh | 0.034 | 2 u00d7 36 kHz |
| 1500 / 500-mesh | 1500 | 80 | 500-Mesh | 0.026 | 3 u00d7 36 kHz |
Specifying Ultrasonic Vibrating Sieve Screen Beyond the Standard
- Frame size: Match the sifter diameter (600–1500 mm).
- Mesh: 200–500 mesh; ultrasonic drive becomes essential below about 100 µm.
- Transducer & cable: Ring transducer frequency and generator compatibility.
When Ultrasonic Vibrating Sieve Screen Is Not the Right Choice
Not needed for coarse free-flowing products.
