Centrifugal Juicer Blade Filter Basket is used for shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected. FDA 21 CFR is the reference cited for it on drawings, datasheets and purchase orders.
What FDA 21 CFR Means for Centrifugal Juicer Blade Filter Basket
The dimensions in the table below are supplied to suit FDA 21 CFR. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Centrifugal Juicer Blade Filter Basket Dimensions
| Size | Top diameter (mm) | Bottom (blade disc) diameter (mm) | Height (mm) | Etched hole (mm) | Cutter teeth | Thickness (mm) |
|---|---|---|---|---|---|---|
| JB-120 | 120 | 82 | 38 | 0.30 u00d7 2.0 slot | 24 | 0.25 |
| JB-140 | 140 | 95 | 45 | 0.30 u00d7 2.0 slot | 28 | 0.25 |
| JB-160 | 160 | 110 | 52 | 0.35 u00d7 2.2 slot | 32 | 0.30 |
| JB-180 | 180 | 120 | 58 | 0.40 round | 36 | 0.30 |
Specifying Centrifugal Juicer Blade Filter Basket Beyond the Standard
- Basket geometry: Specify top and disc diameter, height and the drive coupling so the basket is balanced at 6,000–14,000 rpm.
- Etched hole: Fine slots give clearer juice; round holes clog less with fibrous vegetables.
- Cutter teeth: More teeth shred finer and raise yield, but need harder steel and accurate grinding.
When Centrifugal Juicer Blade Filter Basket Is Not the Right Choice
Not for wheatgrass, leafy greens or nut milks — masticating (slow) juicers extract these far better.
