Slow (Masticating) Juicer Strainer Screen is used for separating juice from pulp in a masticating juicer as the auger presses produce against an etched drum. EU 1935 is the reference cited for it on drawings, datasheets and purchase orders.
What EU 1935 Means for Slow (Masticating) Juicer Strainer Screen
The dimensions in the table below are supplied to suit EU 1935. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Slow (Masticating) Juicer Strainer Screen Dimensions
| Size | Outer diameter (mm) | Length (mm) | Hole diameter (mm) | Open area (%) | Type |
|---|---|---|---|---|---|
| Fine | 76 | 110 | 0.25 | 18 | Juice u2014 etched SS316 drum |
| Coarse | 76 | 110 | 0.60 | 24 | Smoothie u2014 etched drum |
| Horizontal | 58 | 150 | 0.30 | 20 | Horizontal auger screen |
| Wide-chute | 92 | 125 | 0.25 | 18 | Wide-feed vertical |
Specifying Slow (Masticating) Juicer Strainer Screen Beyond the Standard
- Drum size: Match outer diameter and length to the auger and chamber; tolerances are tight.
- Hole diameter: 0.25 mm for clear juice, 0.6 mm for smoothies and sorbets.
- Material: SS316 resists citrus and tomato acids better than plastic or 304 drums.
When Slow (Masticating) Juicer Strainer Screen Is Not the Right Choice
Not for fast, high-volume hard-fruit juicing where a centrifugal juicer is quicker.
