Car Tweeter & Dash Speaker Grille is used for protecting tweeters and dashboard or A-pillar speakers with small, fine-perforated grilles that match interior trim. Automotive OEM (IATF 16949 process) is the reference cited for it on drawings, datasheets and purchase orders.
What Automotive OEM (IATF 16949 process) Means for Car Tweeter & Dash Speaker Grille
The dimensions in the table below are supplied to suit Automotive OEM (IATF 16949 process). Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Car Tweeter & Dash Speaker Grille Dimensions
| Speaker size | Grille diameter (mm) | Hole diameter (mm) | Dome height (mm) | Mounting holes | Thickness (mm) |
|---|---|---|---|---|---|
| 1 in tweeter | 36 | 0.8 | 6 | 0 | 0.4 |
| 1.5 in tweeter | 48 | 1.0 | 7 | 0 | 0.5 |
| 3.5 in dash | 96 | 1.2 | 6 | 2 | 0.6 |
| A-pillar 2 in | 60 | 1.0 | 5 | 2 | 0.5 |
Specifying Car Tweeter & Dash Speaker Grille Beyond the Standard
- Diameter: 36–96 mm, matched to the tweeter or dash opening.
- Hole size: Fine 0.8–1.2 mm holes keep a clean look on surfaces close to the driver's eye line.
- Finish: Matte black or satin to avoid windscreen reflection.
When Car Tweeter & Dash Speaker Grille Is Not the Right Choice
Not for door woofers or subwoofers, which need deeper domes and stronger grilles.
