Vehicle Front Grille & Intake Mesh is used for filling front grilles and bumper intakes with expanded or woven metal mesh that protects radiators from stones while giving a sporty, open look. aftermarket is the reference cited for it on drawings, datasheets and purchase orders.
What aftermarket Means for Vehicle Front Grille & Intake Mesh
The dimensions in the table below are supplied to suit aftermarket. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Vehicle Front Grille & Intake Mesh Dimensions
| Size | Opening (mm) | Strand (mm) | Thickness (mm) | Open area (%) | Finish |
|---|---|---|---|---|---|
| Diamond 8 u00d7 4 | 8 u00d7 4 | 1.0 | 1.0 | 62 | Black powder coat |
| Diamond 12 u00d7 6 | 12 u00d7 6 | 1.5 | 1.2 | 65 | Black powder coat |
| Hex honeycomb 10 | 10 | 1.2 | 1.2 | 70 | Black / chrome |
| Woven 6-Mesh | 3.4 | 0.8 | 1.6 | 65 | Black powder coat |
Specifying Vehicle Front Grille & Intake Mesh Beyond the Standard
- Pattern: Diamond expanded mesh, hex honeycomb or woven — specify opening and strand.
- Open area: Keep 60–70 % so cooling airflow is not restricted.
- Finish: Powder coat or e-coat for road-salt resistance; chrome for show trims.
When Vehicle Front Grille & Intake Mesh Is Not the Right Choice
Not a bug screen; fine insect protection needs a separate finer mesh.
