Food Dehydrator Stainless Mesh Tray is used for drying fruit, vegetables, jerky, herbs and pet treats on stainless mesh trays that let warm air pass evenly through every layer of a dehydrator or drying room. 2004 food contact is the reference cited for it on drawings, datasheets and purchase orders.
What 2004 food contact Means for Food Dehydrator Stainless Mesh Tray
The dimensions in the table below are supplied to suit 2004 food contact. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Food Dehydrator Stainless Mesh Tray Dimensions
| Mesh count | Wire diameter (mm) | Aperture (mm) | Micron rating (u00b5m) | Open area (%) | Tray (mm) |
|---|---|---|---|---|---|
| 4-Mesh | 0.900 | 5.450 | 5450 | 72.0 | 400 u00d7 400 |
| 8-Mesh | 0.600 | 2.575 | 2575 | 65.8 | 400 u00d7 400 |
| 14-Mesh | 0.400 | 1.414 | 1414 | 60.4 | 600 u00d7 400 |
| 20-Mesh | 0.300 | 0.970 | 970 | 58.3 | 600 u00d7 400 |
Specifying Food Dehydrator Stainless Mesh Tray Beyond the Standard
- Mesh: 4–8 mesh for jerky and fruit slices; 14–20 mesh for herbs and small pieces.
- Tray size: Match the dehydrator or trolley rack.
- Frame: Welded stainless frame so trays stay flat when hot.
When Food Dehydrator Stainless Mesh Tray Is Not the Right Choice
Not a baking tray for wet batters or doughs.
