VCR Gasket Filter is used for filtering ultra-high-purity process gases inside the face-seal fitting itself, with a sintered metal disc built into the metal gasket — zero added length and no extra joints. 2 in face-seal fittings is the reference cited for it on drawings, datasheets and purchase orders.
What 2 in face-seal fittings Means for VCR Gasket Filter
The dimensions in the table below are supplied to suit 2 in face-seal fittings. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
VCR Gasket Filter Dimensions
| Size | Diameter (mm) | Micron rating (u00b5m) | Gasket material | Fitting |
|---|---|---|---|---|
| 1/4 in | 10.8 | 0.5 | SS316L | 1/4 in face seal |
| 1/4 in Ni | 10.8 | 2 | Nickel 200 | 1/4 in face seal |
| 1/2 in | 17.5 | 5 | SS316L | 1/2 in face seal |
Specifying VCR Gasket Filter Beyond the Standard
- Fitting size: Matches 1/4 in or 1/2 in face-seal glands.
- Rating: 0.5–5 µm sintered media; finer ratings cost flow.
- Gasket material: SS316L for general gases, nickel for corrosive or high-purity service.
When VCR Gasket Filter Is Not the Right Choice
Not designed for high dirt loads; inline filter housings take more contamination.
