Skip to content

Kitchen & Appliance Filters · IEC 60456 / IEC 61121

80 Mesh Washing Machine & Dryer Lint Filter Mesh Specifications

A rectangular stainless steel woven lint filter screen in a white plastic frame, partly covered with grey lint

80 mesh denotes 80 wires per inch in each direction. For washing machine & dryer lint filter mesh the governing document is IEC 60456 / IEC 61121; the specification row, aperture-micron conversion and selection guidance for this count follow.

80 Mesh Specification Row (IEC 60456 / IEC 61121)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Material
80-Mesh0.1400.17717831.3SS304

80 Mesh to Micron & Aperture

Openings per inch80
Aperture (opening width)0.18 mm
Micron rating178 µm
Standard wire diameter0.14 mm
Open area31.2 %

Aperture = (25.4 mm ÷ mesh count) − wire diameter. The micron rating equals the aperture in micrometres; actual retention also depends on particle shape and cake formation.

Wire Diameter Options at 80 Mesh

OptionWire diaApertureMicronOpen areaWeight (SS)
Heavy wire0.182 mm0.136 mm136 µm18.2 %1.36 kg/m²
Standard wire0.140 mm0.178 mm178 µm31.3 %0.81 kg/m²
Fine wire0.105 mm0.213 mm213 µm44.8 %0.45 kg/m²

Heavier wire adds strength and abrasion life but closes the aperture; finer wire opens the aperture and raises throughput at the cost of durability. Specify mesh count AND wire diameter to fix the aperture unambiguously.

Open Area & Flow at 80 Mesh

The standard 80 mesh weave presents an open area of about 31.2%. At this count the mesh presents little flow resistance; selection is normally driven by particle retention and mechanical strength rather than pressure drop.

80 Mesh Cloth Weight

Standard 80 mesh stainless cloth weighs approximately 0.81 kg/m² (density 7.93 g/cm³ basis; brass and copper weave roughly 10% heavier, aluminum about one third). Use this figure for roll handling and freight estimation.

Typical Applications for 80 Mesh Washing Machine & Dryer Lint Filter Mesh

80 mesh washing machine & dryer lint filter mesh is commonly specified for general straining and sieving, paint and coating filtration, grease filters, insect screening, grain cleaning and pre-filtration ahead of fine media.

Plain, Twill or Dutch Weave at This Rating?

Plain square weave is the standard at this count: every opening is a true square of the stated aperture, retention is absolute for hard spherical particles, and the cloth is easy to clean.

What Washing Machine & Dryer Lint Filter Mesh Does

Trapping lint and fibers in washing machines and tumble dryers before they reach the pump, drain or heater.

Fitting & Care

  • Clean dryer lint screens after every load.
  • Wash the screen with water and a brush monthly to remove softener film.
Mesh count to micron conversion chart
Mesh count to aperture and micron rating. Confirm the exact figure against the specification table below — wire diameter, not mesh count alone, sets the aperture.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (IEC 60456 / IEC 61121)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Material
40-Mesh0.2500.38538536.8SS304
60-Mesh0.1900.23323330.4SS304
80-Mesh0.1400.17717831.3SS304
100-Mesh0.1000.15415436.8SS304

Frequently Asked Questions

What mesh is used for dryer lint screens?

Usually 60–100 mesh, balancing lint capture and airflow.

Why does my dryer take longer?

A blinded lint screen — fabric softener film can block it even when lint is removed.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.