Skip to content

Process Industry Screens · ISO 9044 / screen OEM decks

20 Mesh Hook-Strip Tensioned Screen Panel Specifications

A woven wire screen panel with folded hook strips being tensioned onto a vibrating screen deck at a quarry, gravel

This page covers the 20 mesh count of hook-strip tensioned screen panel: the woven specification per ISO 9044 / screen OEM decks, the particle size it retains, the open area it presents to flow, and the neighbouring counts to step to when the separation requires it.

20 Mesh Specification Row (ISO 9044 / screen OEM decks)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Hook
20-Mesh0.4000.87087046.9Double-folded hook

20 Mesh to Micron & Aperture

Openings per inch20
Aperture (opening width)0.87 mm
Micron rating870 µm
Standard wire diameter0.4 mm
Open area46.9 %

Aperture = (25.4 mm ÷ mesh count) − wire diameter. The micron rating equals the aperture in micrometres; actual retention also depends on particle shape and cake formation.

Wire Diameter Options at 20 Mesh

OptionWire diaApertureMicronOpen areaWeight (SS)
Heavy wire0.520 mm0.750 mm750 µm34.9 %2.78 kg/m²
Standard wire0.400 mm0.870 mm870 µm46.9 %1.65 kg/m²
Fine wire0.300 mm0.970 mm970 µm58.3 %0.93 kg/m²

Heavier wire adds strength and abrasion life but closes the aperture; finer wire opens the aperture and raises throughput at the cost of durability. Specify mesh count AND wire diameter to fix the aperture unambiguously.

Open Area & Flow at 20 Mesh

The standard 20 mesh weave presents an open area of about 46.9%. At this count the mesh presents little flow resistance; selection is normally driven by particle retention and mechanical strength rather than pressure drop.

20 Mesh Cloth Weight

Standard 20 mesh stainless cloth weighs approximately 1.65 kg/m² (density 7.93 g/cm³ basis; brass and copper weave roughly 10% heavier, aluminum about one third). Use this figure for roll handling and freight estimation.

Typical Applications for 20 Mesh Hook-Strip Tensioned Screen Panel

20 mesh hook-strip tensioned screen panel is commonly specified for general straining and sieving, paint and coating filtration, grease filters, insect screening, grain cleaning and pre-filtration ahead of fine media.

Plain, Twill or Dutch Weave at This Rating?

Plain square weave is the standard at this count: every opening is a true square of the stated aperture, retention is absolute for hard spherical particles, and the cloth is easy to clean.

What Hook-Strip Tensioned Screen Panel Does

Screening aggregates, ore, coal and recycled material on vibrating screen decks with woven wire panels whose folded hook strips let the panel be side-tensioned tight across the deck.

Fitting & Care

  • Fit new rubber channel strips on the crowned support bars before tensioning.
  • Tension evenly from both sides and re-check after the first hours of running.
Mesh count to micron conversion chart
Mesh count to aperture and micron rating. Confirm the exact figure against the specification table below — wire diameter, not mesh count alone, sets the aperture.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 9044 / screen OEM decks)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Hook
2-Mesh2.50010.2001020064.530u00b0 side hook
4-Mesh1.6004.750475056.030u00b0 side hook
8-Mesh0.9002.275227551.4Double-folded hook
20-Mesh0.4000.87087046.9Double-folded hook

Frequently Asked Questions

What is a hook-strip screen panel?

A woven wire screen panel with folded steel edges that hook into the deck tensioning rails.

Which steel for vibrating screen panels?

65Mn high-carbon steel for wear; stainless for wet or corrosive duty.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.