Hook-Strip Tensioned Screen Panel is used for screening aggregates, ore, coal and recycled material on vibrating screen decks with woven wire panels whose folded hook strips let the panel be side-tensioned tight across the deck. screen OEM decks is the reference cited for it on drawings, datasheets and purchase orders.
What screen OEM decks Means for Hook-Strip Tensioned Screen Panel
The dimensions in the table below are supplied to suit screen OEM decks. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Hook-Strip Tensioned Screen Panel Dimensions
| Mesh count | Wire diameter (mm) | Aperture (mm) | Micron rating (u00b5m) | Open area (%) | Hook |
|---|---|---|---|---|---|
| 2-Mesh | 2.500 | 10.200 | 10200 | 64.5 | 30u00b0 side hook |
| 4-Mesh | 1.600 | 4.750 | 4750 | 56.0 | 30u00b0 side hook |
| 8-Mesh | 0.900 | 2.275 | 2275 | 51.4 | Double-folded hook |
| 20-Mesh | 0.400 | 0.870 | 870 | 46.9 | Double-folded hook |
Specifying Hook-Strip Tensioned Screen Panel Beyond the Standard
- Aperture & wire: Choose the cut size, then a wire heavy enough for the largest feed lump.
- Hook style: 30° side hooks or double-folded hooks to match the deck clamp rails.
- Steel: 65Mn high-carbon for wear; stainless for wet or corrosive screening.
When Hook-Strip Tensioned Screen Panel Is Not the Right Choice
Not a fine filtration medium — below about 1 mm use finer woven or polyurethane panels.
