Skip to content

Process Industry Screens · Screening Machine Parts

Hook-Strip Tensioned Screen Panel — ISO 9044 / screen OEM decks

Hook-Strip Tensioned Screen Panel for screening aggregates, ore, coal and recycled material on vibrating screen decks with woven wire panels whose folded hook strips let the panel be side-tensioned tight across the deck. 4 sizes listed, with technical drawing and quotation.

A woven wire screen panel with folded hook strips being tensioned onto a vibrating screen deck at a quarry, gravel
Hook-Strip Tensioned Screen Panel (ISO 9044 / screen OEM decks) — Screening Machine Parts

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quotation for Hook-Strip Tensioned Screen Panel

Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Hook-Strip Tensioned Screen Panel (ISO 9044 / screen OEM decks) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 9044 / screen OEM decks)

Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Hook

Hook-Strip Tensioned Screen Panel (ISO 9044 / screen OEM decks) is used for screening aggregates, ore, coal and recycled material on vibrating screen decks with woven wire panels whose folded hook strips let the panel be side-tensioned tight across the deck.

Made by: Woven Wire Mesh (Weaving) · Wire Crimping & Heavy Weaving · Filter Fabrication & Assembly

Where Hook-Strip Tensioned Screen Panel Is Used

  • Quarries & aggregate: top, middle and bottom decks on inclined and horizontal screens.
  • Mining: ore and coal sizing ahead of crushing and washing.
  • Sand & gravel plants: wet screening decks.
  • Recycling: construction waste and asphalt screening.

Read the full application guide for Hook-Strip Tensioned Screen Panel →

How to Specify Hook-Strip Tensioned Screen Panel

  • Aperture & wire: Choose the cut size, then a wire heavy enough for the largest feed lump.
  • Hook style: 30° side hooks or double-folded hooks to match the deck clamp rails.
  • Steel: 65Mn high-carbon for wear; stainless for wet or corrosive screening.

Materials

Standard supply is stainless steel 304; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.

Fitting & Care

  • Fit new rubber channel strips on the crowned support bars before tensioning.
  • Tension evenly from both sides and re-check after the first hours of running.

Common Mistakes

  • Leaving panels slack, which causes wire fatigue and early breakage.
  • Ordering the wrong hook angle for the machine rails.

When Hook-Strip Tensioned Screen Panel Is Not the Right Choice

Not a fine filtration medium — below about 1 mm use finer woven or polyurethane panels.

Related Mesh Products

Pricing

Hook-Strip Tensioned Screen Panel is stocked and supplied to order in rolls, cut sheets and fabricated pieces. Pricing starts from approximately US$95.00 per unit for standard specifications in stainless steel 304; final pricing depends on specification, alloy, quantity and fabrication (MOQ applies). Submit your exact configuration with the quote form above.

Frequently Asked Questions

What is Hook-Strip Tensioned Screen Panel used for?

Screening aggregates, ore, coal and recycled material on vibrating screen decks with woven wire panels whose folded hook strips let the panel be side-tensioned tight across the deck.

What is a hook-strip screen panel?

A woven wire screen panel with folded steel edges that hook into the deck tensioning rails.

Which steel for vibrating screen panels?

65Mn high-carbon steel for wear; stainless for wet or corrosive duty.

Why must screen panels be tensioned?

Proper tension keeps the cut accurate and stops wire fatigue.

What specifications are available for Hook-Strip Tensioned Screen Panel?

The table on this page lists 4 standard specifications for Hook-Strip Tensioned Screen Panel, from 2-Mesh to 20-Mesh. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.

How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.