Skip to content

Kitchen & Appliance Filters · FDA 21 CFR / EU 1935/2004 food contact

316L Stainless Steel Centrifugal Juicer Blade Filter Basket

Stainless steel centrifugal juicer filter basket with a sharp toothed cutter disc at its base and a fine etched mesh wall

Centrifugal Juicer Blade Filter Basket in 316L Stainless Steel (AISI 316L (1.4404)) is used for shredding produce on a toothed cutter disc and spinning the pulp against an etched stainless basket so juice passes and pulp is ejected. The alloy gives superior resistance, including chlorides, brines, food CIP and mild acids and is essentially non-magnetic, with a practical service limit of approx. +550 °C continuous.

Alloy Properties

Grade designationAISI 316L (1.4404)
Magnetic responseEssentially non-magnetic
Service temperatureapprox. +550 °C continuous
Corrosion characteristicSuperior resistance, including chlorides, brines, food CIP and mild acids

Specifications of Centrifugal Juicer Blade Filter Basket Available in 316L Stainless Steel

SizeTop diameter (mm)Bottom (blade disc) diameter (mm)Height (mm)Etched hole (mm)Cutter teethThickness (mm)
JB-12012082380.30 u00d7 2.0 slot240.25
JB-14014095450.30 u00d7 2.0 slot280.25
JB-160160110520.35 u00d7 2.2 slot320.30
JB-180180120580.40 round360.30

Where 316L Stainless Steel Centrifugal Juicer Blade Filter Basket Is Used

  • Juicer OEMs: blade-and-basket assemblies for centrifugal juicers.
  • Spare parts distributors: replacement baskets for worn or cracked originals.
  • Juice bars: high-throughput basket upgrades for commercial centrifugal units.
  • Appliance repair: service kits matched to the motor coupling.

Ordering Centrifugal Juicer Blade Filter Basket in 316L Stainless Steel

  • Basket geometry: Specify top and disc diameter, height and the drive coupling so the basket is balanced at 6,000–14,000 rpm.
  • Etched hole: Fine slots give clearer juice; round holes clog less with fibrous vegetables.
  • Cutter teeth: More teeth shred finer and raise yield, but need harder steel and accurate grinding.

Mistakes to Avoid with Centrifugal Juicer Blade Filter Basket

  • Running a cracked or unbalanced basket — at speed it can shatter the cover.
  • Using a coarse-hole basket for leafy greens, which wrap and blind it quickly.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (FDA 21 CFR / EU 1935/2004 food contact)

SizeTop diameter (mm)Bottom (blade disc) diameter (mm)Height (mm)Etched hole (mm)Cutter teethThickness (mm)
JB-12012082380.30 u00d7 2.0 slot240.25
JB-14014095450.30 u00d7 2.0 slot280.25
JB-160160110520.35 u00d7 2.2 slot320.30
JB-180180120580.40 round360.30

Frequently Asked Questions

Why does my centrifugal juicer vibrate?

Uneven pulp build-up or a damaged basket unbalances it. Clean it and check for cracks or bent mesh.

How often should a juicer basket be replaced?

When the teeth dull, the mesh tears or the hub cracks — typically every one to three years in daily use.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.