Material page for welded wire mesh rolls in 304 Stainless Steel. The standard general-purpose stainless mesh alloy. Covers the grade designation (AISI 304 (1.4301)), corrosion and magnetic behavior, cleaning and compatibility notes, and the specifications available.
Why Choose 304 Stainless Steel for Welded Wire Mesh Rolls
The standard general-purpose stainless mesh alloy. For welded wire mesh rolls, this matters when good general corrosion resistance in atmosphere and fresh water is the controlling requirement.
Alloy Properties
| Grade designation | AISI 304 (1.4301) |
|---|---|
| Magnetic response | Essentially non-magnetic (annealed) |
| Service temperature | approx. +450 °C continuous |
| Corrosion characteristic | Good general corrosion resistance in atmosphere and fresh water |
Corrosion Behavior in Filtration Service
304 gives good resistance to atmospheric exposure, fresh water and most neutral media, and is the standard general-purpose grade for welded wire mesh rolls. In chloride-bearing service (seawater, brines, road-salt spray) step up to 316L; in reducing acids consider a nickel alloy.
Comparable Alloys
The direct upgrade from 304 is 316L (chlorides, acids, CIP). Downgrade options for dry, indoor screening are galvanized or plain steel. For heat beyond ~450 °C move to Inconel 600; for seawater immersion consider Monel 400 or duplex 2205 for welded wire mesh rolls.
Specifications of Welded Wire Mesh Rolls Available in 304 Stainless Steel
| Opening (mm) | Wire diameter (mm) | Format | Standard size | Reference standard |
|---|---|---|---|---|
| 12.7x12.7 | 1.6 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 25.4x25.4 | 2.0 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 50.8x50.8 | 2.5 | Panel | 1.2 x 2.4 m | EN 10223-7 |
| 50x50 | 4.0 | Panel | 2.0 x 3.0 m | EN 10223-7 |