Skip to content

Knitted Wire Mesh · ASME sizing practice

Monel 400 Demister Pads (Mist Eliminators)

Monel 400 Demister Pads (Mist Eliminators) reference image

Material page for demister pads (mist eliminators) in Monel 400. The marine and chemical-processing specialist alloy. Covers the grade designation (UNS N04400 (2.4360)), corrosion and magnetic behavior, cleaning and compatibility notes, and the specifications available.

Why Choose Monel 400 for Demister Pads (Mist Eliminators)

The marine and chemical-processing specialist alloy. For demister pads (mist eliminators), this matters when excellent resistance to seawater, hydrofluoric acid and alkalis is the controlling requirement.

Alloy Properties

Grade designationUNS N04400 (2.4360)
Magnetic responseSlightly magnetic
Service temperatureapprox. +540 °C
Corrosion characteristicExcellent resistance to seawater, hydrofluoric acid and alkalis

Cleaning & Compatibility

Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.

Comparable Alloys

Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.

Specifications of Demister Pads (Mist Eliminators) Available in Monel 400

Pad density (kg/mu00b3)Thickness (mm)Wire diameter (mm)GradeReference standard
801000.28General purposeASME approx. sizing
1121000.28StandardASME approx. sizing
144100-1500.28High efficiencyASME approx. sizing
1921500.23High efficiencyASME approx. sizing
3001500.15Co-knit glass fiberASME approx. sizing

Where Monel 400 Demister Pads (Mist Eliminators) Is Used

  • Oil & gas production: inlet separators, gas scrubbers and glycol contactors.
  • Chemical & refining: distillation, absorption and stripping columns.
  • Evaporators & desalination: stopping brine and product carry-over into vapor.
  • Compressed air & vacuum: oil-mist and water separators.

Ordering Demister Pads (Mist Eliminators) in Monel 400

  • Vessel & manway: Pad diameter, number of sections and the largest piece that fits the manway.
  • Pad type: Standard density for general duty, high-efficiency for fine mist, open type for fouling service.
  • Support grids: Top and bottom grids with tie wires so the pad cannot lift or sag.

Mistakes to Avoid with Demister Pads (Mist Eliminators)

  • Undersizing the pad area so gas velocity exceeds the design K-factor.
  • Using high-density pads in fouling or waxy service, where they plug.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ASME sizing practice)

Pad density (kg/mu00b3)Thickness (mm)Wire diameter (mm)GradeReference standard
801000.28General purposeASME approx. sizing
1121000.28StandardASME approx. sizing
144100-1500.28High efficiencyASME approx. sizing
1921500.23High efficiencyASME approx. sizing
3001500.15Co-knit glass fiberASME approx. sizing

Frequently Asked Questions

What droplet size does a mesh pad remove?

Typically droplets down to about 3–5 µm at design velocity.

Which material for demister pads?

Stainless 304/316 for most duties; Monel, nickel alloys or polypropylene for corrosive service.

When is Monel 400 worth the premium over stainless?

Specify Monel 400 when the datasheet chemistry rules stainless out — excellent resistance to seawater, hydrofluoric acid and alkalis. For everything else, 316L is usually the economic choice.

Can Monel 400 demister pads (mist eliminators) be welded into frames?

Yes — spot, TIG and plasma welding are standard for framing and edging. Use matching filler, keep heat input low to protect the fine wires, and re-passivate stainless after fabrication.

Is Monel 400 demister pads (mist eliminators) magnetic?

Monel 400 demister pads (mist eliminators) is slightly magnetic. Note that heavy cold-working during weaving can make austenitic stainless slightly magnetic at the wire surface.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.