Welded Wire Mesh Panels woven or fabricated in Inconel 600 (UNS N06600 (2.4816)) keeps its dimensional specification to EN 10223-7 / ASTM A740; the alloy determines corrosion behavior (excellent oxidation resistance at extreme temperature) and the service temperature limit (approx. +1000 °C (short excursions higher)). Both are covered below with the full specification table.
Why Choose Inconel 600 for Welded Wire Mesh Panels
The high-temperature furnace and hot-gas filtration alloy. For welded wire mesh panels, this matters when excellent oxidation resistance at extreme temperature is the controlling requirement.
Alloy Properties
| Grade designation | UNS N06600 (2.4816) |
|---|---|
| Magnetic response | Essentially non-magnetic |
| Service temperature | approx. +1000 °C (short excursions higher) |
| Corrosion characteristic | Excellent oxidation resistance at extreme temperature |
Corrosion Behavior in Filtration Service
Nickel-family alloys are specified for welded wire mesh panels when stainless is not enough: Monel 400 for seawater and hydrofluoric acid, Inconel 600 for oxidation at extreme temperature, Hastelloy C-276 for hot chlorides and mixed acids, titanium for chlorides with weight savings. Match the alloy to the specific chemistry — they are not interchangeable.
Comparable Alloys
Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.
Specifications of Welded Wire Mesh Panels Available in Inconel 600
| Opening (mm) | Wire diameter (mm) | Format | Standard size | Reference standard |
|---|---|---|---|---|
| 12.7x12.7 | 1.6 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 25.4x25.4 | 2.0 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 50.8x50.8 | 2.5 | Panel | 1.2 x 2.4 m | EN 10223-7 |
| 50x50 | 4.0 | Panel | 2.0 x 3.0 m | EN 10223-7 |
| 75x75 | 5.0 | Panel | 2.0 x 3.0 m | EN 10223-7 |
| 100x100 | 6.0 | Panel | 2.0 x 6.0 m | EN 10223-7 |
