Skip to content
Request a Quote

Welded Wire Mesh · EN 10223-7 / ASTM A740

304 Stainless Steel Welded Wire Mesh Panels

304 Stainless Steel Welded Wire Mesh Panels reference image

304 Stainless Steel welded wire mesh panels combines the construction of welded wire mesh panels (EN 10223-7 / ASTM A740) with the properties of AISI 304 (1.4301): good general corrosion resistance in atmosphere and fresh water, essentially non-magnetic (annealed), service to approx. +450 °C continuous. This page summarizes the grade data, its behavior in filtration service, comparable alloys, and the specifications supplied.

Why Choose 304 Stainless Steel for Welded Wire Mesh Panels

The standard general-purpose stainless mesh alloy. For welded wire mesh panels, this matters when good general corrosion resistance in atmosphere and fresh water is the controlling requirement.

Alloy Properties

Grade designationAISI 304 (1.4301)
Magnetic responseEssentially non-magnetic (annealed)
Service temperatureapprox. +450 °C continuous
Corrosion characteristicGood general corrosion resistance in atmosphere and fresh water

Corrosion Behavior in Filtration Service

304 gives good resistance to atmospheric exposure, fresh water and most neutral media, and is the standard general-purpose grade for welded wire mesh panels. In chloride-bearing service (seawater, brines, road-salt spray) step up to 316L; in reducing acids consider a nickel alloy.

Comparable Alloys

The direct upgrade from 304 is 316L (chlorides, acids, CIP). Downgrade options for dry, indoor screening are galvanized or plain steel. For heat beyond ~450 °C move to Inconel 600; for seawater immersion consider Monel 400 or duplex 2205 for welded wire mesh panels.

Specifications of Welded Wire Mesh Panels Available in 304 Stainless Steel

Opening (mm)Wire diameter (mm)FormatStandard sizeReference standard
12.7x12.71.6Panel / roll1.0 x 2.0 mEN 10223-7
25.4x25.42.0Panel / roll1.0 x 2.0 mEN 10223-7
50.8x50.82.5Panel1.2 x 2.4 mEN 10223-7
50x504.0Panel2.0 x 3.0 mEN 10223-7
75x755.0Panel2.0 x 3.0 mEN 10223-7
100x1006.0Panel2.0 x 6.0 mEN 10223-7

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (EN 10223-7 / ASTM A740)

Opening (mm)Wire diameter (mm)FormatStandard sizeReference standard
12.7x12.71.6Panel / roll1.0 x 2.0 mEN 10223-7
25.4x25.42.0Panel / roll1.0 x 2.0 mEN 10223-7
50.8x50.82.5Panel1.2 x 2.4 mEN 10223-7
50x504.0Panel2.0 x 3.0 mEN 10223-7
75x755.0Panel2.0 x 3.0 mEN 10223-7
100x1006.0Panel2.0 x 6.0 mEN 10223-7

Frequently Asked Questions

Is 304 Stainless Steel food-grade?

Stainless 304 and 316 are both accepted food-contact materials; 316L is preferred where chloride-bearing CIP or brines are used. Specify electro-polishing for the smoothest, most cleanable surface.

Can 304 Stainless Steel welded wire mesh panels be welded into frames?

Yes — spot, TIG and plasma welding are standard for framing and edging. Use matching filler, keep heat input low to protect the fine wires, and re-passivate stainless after fabrication.

Is 304 Stainless Steel welded wire mesh panels magnetic?

304 Stainless Steel welded wire mesh panels is essentially non-magnetic (annealed). Note that heavy cold-working during weaving can make austenitic stainless slightly magnetic at the wire surface.

What corrosion resistance does 304 Stainless Steel offer?

304 Stainless Steel provides good general corrosion resistance in atmosphere and fresh water, with a practical service range of approx. +450 °C continuous.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.