Pure Copper slotted hole perforated sheet combines the construction of slotted hole perforated sheet (DIN 24041 (Lg)) with the properties of C11000: good atmospheric resistance with a stable patina; outstanding conductivity, non-magnetic, service to approx. +200 °C. This page summarizes the grade data, its behavior in filtration service, comparable alloys, and the specifications supplied.
Why Choose Pure Copper for Slotted Hole Perforated Sheet
The EMI/RFI shielding and Faraday-cage mesh material. For slotted hole perforated sheet, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Slotted Hole Perforated Sheet Available in Pure Copper
| Slot width (mm) | Slot length (mm) | Bridge (mm) | Open area (%) | Thickness (mm) | Reference standard |
|---|---|---|---|---|---|
| 0.5 | 10 | 1.0 | 28 | 0.8 | DIN 24041 |
| 1.0 | 12 | 1.5 | 33 | 1.0 | DIN 24041 |
| 1.5 | 20 | 2.0 | 38 | 1.2 | DIN 24041 |
| 2.0 | 20 | 2.5 | 40 | 1.5 | DIN 24041 |
| 3.0 | 25 | 3.0 | 43 | 2.0 | DIN 24041 |
| 5.0 | 40 | 4.0 | 45 | 2.0 | DIN 24041 |
